Related Manuals for WAGO 750 XTR
Summary of Contents for WAGO 750 XTR
- Page 1 Manual WAGO I/O System 750 XTR 750-471/040-000 4AI U/I Diff Galv XTR 4-Channel Analog Input; for Voltage/Current; Extreme Version 1.0.2...
- Page 2 We wish to point out that the software and hardware terms as well as the trademarks of companies used and/or mentioned in the present manual are generally protected by trademark or patent. WAGO is a registered trademark of WAGO Verwaltungsgesellschaft mbH. Manual Version 1.0.2...
-
Page 3: Table Of Contents
WAGO I/O System 750 XTR Table of Contents 750-471/040-000 4AI U/I Diff Galv XTR Table of Contents Notes about this Documentation ............. 5 Validity of this Documentation..............5 Copyrights ....................5 Copyright ....................7 Symbols ....................8 Number Notation .................. 10 Font Conventions ................. - Page 4 Connect Devices ..................56 Connecting a Conductor to the CAGE CLAMP ........56 ® Connection Examples ................57 Commissioning ..................58 Configuration and Parameterization with WAGO Software Tools ..58 7.1.1 Start via WAGO-I/O-CHECK ............58 7.1.2 Parameterization Dialog ..............61 7.1.3 Toolbar on the Configuration Dialog ..........
-
Page 5: Notes About This Documentation
(4AI U/I Diff Galv XTR). The I/O module 750-471/040-000 shall only be installed and operated according to the instructions in this manual, in the system description for the WAGO I/O System 750 XTR and in the manual for the used fieldbus coupler/controller. - Page 6 Notes about this Documentation WAGO I/O System 750 XTR 750-471/040-000 4AI U/I Diff Galv XTR MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;...
-
Page 7: Copyright
Manual by third parties that violate pertinent copyright provisions is prohibited. Reproduction, translation, electronic and phototechnical filing/archiving (e.g., photocopying) as well as any amendments require the written consent of WAGO GmbH & Co. KG, Minden, Germany. Non-observance will involve the right to assert damage claims. Manual... -
Page 8: Symbols
Notes about this Documentation WAGO I/O System 750 XTR 750-471/040-000 4AI U/I Diff Galv XTR Symbols Personal Injury! Indicates a high-risk, imminently hazardous situation which, if not avoided, will result in death or serious injury. Personal Injury Caused by Electric Current! Indicates a high-risk, imminently hazardous situation which, if not avoided, will result in death or serious injury. - Page 9 WAGO I/O System 750 XTR Notes about this Documentation 750-471/040-000 4AI U/I Diff Galv XTR Additional Information: Refers to additional information which is not an integral part of this documentation (e.g., the Internet). Manual Version 1.0.2...
-
Page 10: Number Notation
Notes about this Documentation WAGO I/O System 750 XTR 750-471/040-000 4AI U/I Diff Galv XTR Number Notation Table 1: Number Notation Number Code Example Note Decimal Normal notation Hexadecimal 0x64 C notation Binary '100' In quotation marks, nibble separated '0110.0100' with dots (.) -
Page 11: Important Notes
2.1.1 Subject to Changes WAGO GmbH & Co. KG reserves the right to provide for any alterations or modifications. WAGO GmbH & Co. KG owns all rights arising from the granting of patents or from the legal protection of utility patents. Third-party products are always mentioned without any reference to patent rights. -
Page 12: Technical Condition Of Specified Devices
These modules contain no parts that can be serviced or repaired by the user. The following actions will result in the exclusion of liability on the part of WAGO GmbH & Co. KG: •... -
Page 13: 2.1.4.1.2 Packaging
WAGO I/O System 750 XTR Important Notes 750-471/040-000 4AI U/I Diff Galv XTR Environmentally friendly disposal benefits health and protects the environment from harmful substances in electrical and electronic equipment. • Observe national and local regulations for the disposal of electrical and electronic equipment. -
Page 14: Safety Advice (Precautions)
Important Notes WAGO I/O System 750 XTR 750-471/040-000 4AI U/I Diff Galv XTR Safety Advice (Precautions) For installing and operating purposes of the relevant device to your system the following safety precautions shall be observed: Do not work on devices while energized! All power sources to the device shall be switched off prior to performing any installation, repair or maintenance work. - Page 15 WAGO I/O System 750 XTR Important Notes 750-471/040-000 4AI U/I Diff Galv XTR Power from SELV/PELV power supply only! All field signals and field supplies connected to this XTR I/O module (750-471/040-000) must be powered from SELV/PELV power supply(s)! Inadequate wire cross sections can cause temperature increases! To avoid increasing thermal risks, only use conductor cross-sections sufficient for the required maximum load current.
- Page 16 Important Notes WAGO I/O System 750 XTR 750-471/040-000 4AI U/I Diff Galv XTR Do not exceed the maximum total current for I/O modules (5 VDC) via data contacts! The maximum permissible total current for internal system supply of the I/O modules may not be exceeded.
- Page 17 WAGO I/O System 750 XTR Important Notes 750-471/040-000 4AI U/I Diff Galv XTR Do not reverse the polarity of connection lines! Avoid reverse polarity of data and power supply lines, as this may damage the devices involved. Avoid electrostatic discharge! The devices are equipped with electronic components that may be destroyed by electrostatic discharge when touched.
-
Page 18: Device Description
Device Description WAGO I/O System 750 XTR 750-471/040-000 4AI U/I Diff Galv XTR Device Description The I/O Module 750-471/040-000 (4AI U/I Diff Galv XTR) processes differential current and voltage signals from the field: • 0 … 10 V • ±10 V •... -
Page 19: Table 3: Compatibility List 750-471/040-000
750-626/040-000 are generally to be used for XTR module groups. The 750-471/040-000 module can be used with the fieldbus couplers and controllers of the WAGO I/O System 750 of the specified version or higher listed in the “Compatibility list” table. - Page 20 Device Description WAGO I/O System 750 XTR 750-471/040-000 4AI U/I Diff Galv XTR Table 3: Compatibility List 750-471/040-000 Fieldbus Couplers/ Revision Status Bus System Item No. Controllers – Firmware 750-341 750-342 750-352 750-352/040-000 Fieldbus coupler 750-362 750-363 750-363/040-000 750-364/040-010 750-365/040-010...
-
Page 21: View
WAGO I/O System 750 XTR Device Description 750-471/040-000 4AI U/I Diff Galv XTR View Figure 1: View Table 4: Legend for Figure “View” Pos. Description Details See Section Marking possibility with Mini- Status LEDs “Device Description” > “Display Elements” Data contacts “Device Description”... -
Page 22: Connectors
Device Description WAGO I/O System 750 XTR 750-471/040-000 4AI U/I Diff Galv XTR Connectors 3.2.1 Data Contacts/Local Bus Communication between the fieldbus coupler/controller and the I/O modules as well as the system supply of the I/O modules is carried out via the local bus. The contacting for the local bus consists of 6 data contacts, which are available as self-cleaning gold spring contacts. -
Page 23: Power Jumper Contacts/Field Supply
WAGO I/O System 750 XTR Device Description 750-471/040-000 4AI U/I Diff Galv XTR 3.2.2 Power Jumper Contacts/Field Supply Risk of injury due to sharp-edged blade contacts! The blade contacts are sharp-edged. Handle the I/O module carefully to prevent injury. Do not touch the blade contacts. -
Page 24: Cage Clamp ® Connectors
I/O module can be achieved even in the presence of interference acting on the signal cable. Shield Connection System for Electromagnetic Compatibility! The WAGO Shield Connection System offers a full range of accessories for maintaining electromagnetic compatibility (EMC)! Related information is available at www.wago.com. -
Page 25: Display Elements
WAGO I/O System 750 XTR Device Description 750-471/040-000 4AI U/I Diff Galv XTR Display Elements Figure 5: Display Elements Table 7: Legend for Figure “Display Elements“ Channel Designation LED State Function Operational readiness and trouble-free Green local bus communication Status AI 1... - Page 26 Device Description WAGO I/O System 750 XTR 750-471/040-000 4AI U/I Diff Galv XTR Table 7: Legend for Figure “Display Elements“ Channel Designation LED State Function Operational readiness and trouble-free Green local bus communication Status AI 4 No operational readiness or the local...
-
Page 27: Schematic Diagram
WAGO I/O System 750 XTR Device Description 750-471/040-000 4AI U/I Diff Galv XTR Schematic Diagram Figure 6: Schematic Diagram Figure 7: Circuit Diagram Manual Version 1.0.2... -
Page 28: Technical Data
Device Description WAGO I/O System 750 XTR 750-471/040-000 4AI U/I Diff Galv XTR Technical Data 3.5.1 Device Data Table 8: Technical Data – Device Width 12 mm Depth (from upper edge of DIN-rail) 60.6 mm Height 100 mm Weight 50 g... -
Page 29: Inputs
WAGO I/O System 750 XTR Device Description 750-471/040-000 4AI U/I Diff Galv XTR 3.5.4 Inputs Table 11: Technical Data – Inputs Number of analog inputs 4 (electrically isolated) Signal type Voltages and currents Signal characteristic Differential Measurement range 0 … 20 mA; 4 … 20 mA 3.6 …... -
Page 30: Mechanical Conditions
Device Description WAGO I/O System 750 XTR 750-471/040-000 4AI U/I Diff Galv XTR Table 14: Technical Data – Power Jumper Contacts Power jumper contacts Blade/spring contact, self-cleaning, hard gold plated Table 15: Technical Data – Data Contacts Data contacts Slide contact, self-cleaning, hard gold plated 3.5.7... -
Page 31: Approvals
WAGO I/O System 750 XTR Device Description 750-471/040-000 4AI U/I Diff Galv XTR Approvals For current approvals, please go to: www.wago.com/<Item number>. The following approvals have been granted to 750-471/040-000 I/O modules: Conformity Marking UL E175199 for use in Ordinary... - Page 32 Device Description WAGO I/O System 750 XTR 750-471/040-000 4AI U/I Diff Galv XTR The following ship approvals are pending for 750-471/040-000 I/O modules: ABS (American Bureau of Shipping) LR (Lloyd’s Register) Env. 1, 2, 3, 4 For more information about the ship approvals: Note the “Supplementary Power Supply Regulations”...
-
Page 33: Standards And Guidelines
WAGO I/O System 750 XTR Device Description 750-471/040-000 4AI U/I Diff Galv XTR Standards and Guidelines 750-471/040-000 I/O modules meet the following standards and guidelines: Table 18: Standards and Rated Conditions for Explosion Protection Applications ATEX acc. Directive 2014/34/EU General Requirements... -
Page 34: Table 19: Climatic And Mechanical Environmental Conditions And
Device Description WAGO I/O System 750 XTR 750-471/040-000 4AI U/I Diff Galv XTR Table 19: Climatic and Mechanical Environmental Conditions and Shipbuilding Standard Test Value Transport EN 60870-2-2 Ct2(2k4) (except precipitation/water/moisture) Mechanical Environmental Conditions EN 61850-3 Achieved EN 60870-2-2 EN 60721-3-1... -
Page 35: Table 20: Emc - Product- And Generic Standards
WAGO I/O System 750 XTR Device Description 750-471/040-000 4AI U/I Diff Galv XTR The I/O module 750-471/040-000 meets the following EMC standards as these standards relate to the I/O module: Table 20: EMC – Product- and Generic Standards EN IEC 61000-6-1... -
Page 36: Table 21: Emc - Testing Standards: Immunity To Interference
Device Description WAGO I/O System 750 XTR 750-471/040-000 4AI U/I Diff Galv XTR Table 21: EMC – Testing Standards: Immunity to Interference Standard Test Value Electrostatic Discharge • EN 61000-4-2 8 kV (contact discharge) • IEEE C37.90.3 8 kV (air discharge) High-frequency Electromagnetic Fields •... -
Page 37: Table 22: Emc - Testing Standards: Emission Of Interference
WAGO I/O System 750 XTR Device Description 750-471/040-000 4AI U/I Diff Galv XTR Table 22: EMc – Testing Standards: Emission of Interference Standard Test Value Enclosure Emission of Interference • EN 55016-2-3 ACHTUNG: Angaben in Variablen noch überprüfen!!!! 30 dB(µV/m), QP, 30 MHz …... - Page 38 Device Description WAGO I/O System 750 XTR 750-471/040-000 4AI U/I Diff Galv XTR Table 22: EMc – Testing Standards: Emission of Interference Standard Test Value Conducted Emissions – Wired Network Ports • EN 55032 Class A 53 dB(μA) … 43 dB(μA) QP, 0.15 MHz ...
-
Page 39: Table 23: Standards And Rated Conditions For Rail Applications
MTBF values (acc. to MIL-HDBK-217-F2) are available and can be provided on request for specific projects WAGO is a company certified in accordance with the IRIS quality standard. Table 24: Further EMC Requirements for Railroad Applications Requirement Fulfills Class EBA Regulation No. EMC 06... -
Page 40: Process Image
= 1; B2 is not used. The measured value is then mapped with a resolution of thirteen bits on bits B3 ... B15. The WAGO-I/O-CHECK commissioning tool can be used to parameterize the required operating mode. Alternatively, the I/O module can also be parameterized via PROFIBUS and PROFINET device description (GSD file). -
Page 41: Table 25: Process Image - I/O Module750-471/040-000
WAGO I/O System 750 XTR Process Image 750-471/040-000 4AI U/I Diff Galv XTR Table 25: Process Image – I/O module750-471/040-000 Process image Input Output Byte 0 Status byte CH1_S0 Byte 0 Control byte CH1_C0 Byte 1 Depending on status byte:... -
Page 42: Status Bytes
Process Image WAGO I/O System 750 XTR 750-471/040-000 4AI U/I Diff Galv XTR Status bytes Status bytes are identically implemented for all channels. Therefore, the following description in this section applies to all status bytes of the I/O module. Table 26: Status byte CH1_S0... -
Page 43: Process Data
WAGO I/O System 750 XTR Process Image 750-471/040-000 4AI U/I Diff Galv XTR Process Data 4.3.1 Overview of Sensor Types The following table serves as an overview of all supported sensor types. The following sections provide detailed information about the individual sensor types. -
Page 44: Signal Types "0
Process Image WAGO I/O System 750 XTR 750-471/040-000 4AI U/I Diff Galv XTR 4.3.1.1 Signal Types “0 … 10 V”, “0 … 20 mA” and “4 … 20 mA” (Default) Only one signal type per channel can be set as operating mode via the commissioning tool. -
Page 45: Table 29: Signal Types "0
WAGO I/O System 750 XTR Process Image 750-471/040-000 4AI U/I Diff Galv XTR Table 29: Signal Types “0 … 10 V, 0 … 20 mA” and “4 … 20 mA” with Status Information in the Process Image Measuring range Process value... -
Page 46: (Default)
Process Image WAGO I/O System 750 XTR 750-471/040-000 4AI U/I Diff Galv XTR 4.3.1.2 Signal Types “±10 V”, “±200 mV” “±20 mA”, Two’s complement (Default) Only one signal type per channel can be set as operating mode via the commissioning tool. -
Page 47: Table 31: Signal Types "±10 V", "±200 Mv" "±20 Ma", Two's Complement
WAGO I/O System 750 XTR Process Image 750-471/040-000 4AI U/I Diff Galv XTR Table 31: Signal Types “±10 V”, “±200 mV” “±20 mA”, Two’s Complement with Status Information in the Process Image Measuring range Process value Status Error byte Binary ±10 V... -
Page 48: Table 33: Signal Types "±10 V", "±200 Mv" "±20 Ma", Amount/Sign Format
Process Image WAGO I/O System 750 XTR 750-471/040-000 4AI U/I Diff Galv XTR Table 33: Signal Types “±10 V”, “±200 mV” “±20 mA”, Amount/sign format with Status Information in the Process Image Measuring range Process value Status Error byte Binary ±... -
Page 49: Signal Type "Namur Ne43
WAGO I/O System 750 XTR Process Image 750-471/040-000 4AI U/I Diff Galv XTR 4.3.1.3 Signal Type “Namur NE43” Table 34: Signal Type “Namur NE43”, Two’s Complement Measuring range [mA] Process value Status Error byte hex. Namur NE43 Binary Hex. Dec. -
Page 50: Table 35: Signal Type "Namur Ne43", Two's Complement With Status
Process Image WAGO I/O System 750 XTR 750-471/040-000 4AI U/I Diff Galv XTR Table 35: Signal Type “Namur NE43”, Two’s Complement with Status Information in the Process Image Measuring range [mA] Process value Status Error Binary byte hex. Namur NE43 Hex. -
Page 51: Table 36: Signal Type "Namur Ne43", Amount/Sign Format
WAGO I/O System 750 XTR Process Image 750-471/040-000 4AI U/I Diff Galv XTR Table 36: Signal Type “Namur NE43”, Amount/sign format Measuring range [mA] Process value Statusbyte Error hex. Binary Hex. Dec. Namur NE43 < −14,0 mA 1000.0001.1000.1100 0x818C −397 0x50 Neg. -
Page 52: Table 37: Signal Type "Namur Ne43", Amount/Sign Format With Status
Process Image WAGO I/O System 750 XTR 750-471/040-000 4AI U/I Diff Galv XTR Table 37: Signal Type “Namur NE43”, Amount/sign format with Status Information in the Process Image Measuring range [mA] Process value Statusbyte Error Binary hex. Hex. Dec. Namur NE43 XFÜ... -
Page 53: Mounting
750-471/040-000 4AI U/I Diff Galv XTR Mounting Mounting Sequence Fieldbus couplers, controllers and I/O modules of the WAGO I/O System 750 are snapped directly on a carrier rail in accordance with the European standard EN 60175 (DIN 35). The reliable positioning and connection is made using a tongue and groove system. -
Page 54: Inserting And Removing Devices
Mounting WAGO I/O System 750 XTR 750-471/040-000 4AI U/I Diff Galv XTR Inserting and Removing Devices Do not touch hot surfaces! The surface of the housing can become hot during operation. If the device was operated at high ambient temperatures, allow it to cool off before touching it. -
Page 55: Removing The I/O Module
WAGO I/O System 750 XTR Mounting 750-471/040-000 4AI U/I Diff Galv XTR Figure 9: Snap the I/O Module into Place (Example) Check that the I/O module is seated securely on the carrier rail and in the assembly. The I/O module must not be inserted crooked or askew. -
Page 56: Connect Devices
Do not connect more than one conductor at one single connection! If more than one conductor must be routed to one connection, these must be connected in an up-circuit wiring assembly, for example using WAGO feed- through terminals. For opening the CAGE CLAMP ®... -
Page 57: Connection Examples
WAGO I/O System 750 XTR Connect Devices 750-471/040-000 4AI U/I Diff Galv XTR Connection Examples Figure 12: Connection Example 750-471/040-000 Manual Version 1.0.2... -
Page 58: Commissioning
WAGO Software Tools 7.1.1 Start via WAGO-I/O-CHECK The I/O module is supported by the commissioning tool WAGO-I/O-CHECK as of version 03.24.05(01). Figure 13: Starting the Parameterization Dialog From WAGO-I/O-CHECK To start parameterizing the I / O module using the WAGO-I/O-CHECK... - Page 59 Calibration of channels and adjustment of analog inputs • Monitoring You can obtain the WAGO-I/O-CHECK software on a CD under Item No. 759-302. This CD contains all the application program files and an explanation. You can find a description at the internet page at http://www.wago.com!
-
Page 60: Figure 14: Wago-I/O-Check User Interface
Commissioning WAGO I/O System 750 XTR 750-471/040-000 4AI U/I Diff Galv XTR After the node structure has been identified in WAGO-I/O-CHECK, it appears in the overview area. To open specific parameterization dialogs for the I/O module, proceed as follow: Choose the I/O module. -
Page 61: Parameterization Dialog
WAGO I/O System 750 XTR Commissioning 750-471/040-000 4AI U/I Diff Galv XTR 7.1.2 Parameterization Dialog Figure 15: Parameterization Dialog The parameterization dialog is divided into the following areas: Title Bar with information about the position of the selected I/O module... -
Page 62: Navigation Area
Commissioning WAGO I/O System 750 XTR 750-471/040-000 4AI U/I Diff Galv XTR Table 38: Toolbar Button Function Description Exit Closes the configuration dialog. Opens an existing parameterization file. WAGO- Open I/O-CHECK displays the default dialog for opening files. Saves the current parameter in a parameter file. -
Page 63: Common
WAGO I/O System 750 XTR Commissioning 750-471/040-000 4AI U/I Diff Galv XTR Table 39: Navigation Button Description General settings for all channels of the I/O module. Channel settings for channel 1. Channel settings for channel 2. Channel settings for channel 3. -
Page 64: Table 40: "General" Parameters
Commissioning WAGO I/O System 750 XTR 750-471/040-000 4AI U/I Diff Galv XTR Table 40: "General" Parameters Selection Field Settings Number format There are two ways the process image can be represented on the fieldbus: Two's complement* Amount/sign Siemens S5 format This can be used to fade in status indicators in the lowest three bits. -
Page 65: Channel Settings
WAGO I/O System 750 XTR Commissioning 750-471/040-000 4AI U/I Diff Galv XTR 7.1.4.2 Channel Settings Figure 19: Parameter „Channel“ In the menus Channel 1 … 4 you can make channel granular settings: Table 41: Parameter „Channel“ Selection Field Possible Settings... -
Page 66: Scaling
Commissioning WAGO I/O System 750 XTR 750-471/040-000 4AI U/I Diff Galv XTR Table 41: Parameter „Channel“ Selection Field Possible Settings Off* Wire break diagnostics is OFF. Diagnosis: Measuring The measurement overrange diagnostics can be range overflow switched on or off here. -
Page 67: Figure 20: Parameter "Scaling
WAGO I/O System 750 XTR Commissioning 750-471/040-000 4AI U/I Diff Galv XTR Figure 20: Parameter “Scaling” To select the process value for the respective channel, select the corresponding tab [Channel 1] ... [Channel 4]. Table 42: “Scaling” Parameters Selection/Control Field Possible Settings Manufacturer scaling Can be switched on or off;... -
Page 68: Calibration
Commissioning WAGO I/O System 750 XTR 750-471/040-000 4AI U/I Diff Galv XTR Observe the Detailed information about User Scaling! Detailed information about user scaling can be found in Section “Scaling Measured Values”! 2/4 Analogei ngangs klemme Analog 750- 464 ( Skali erung) 7.1.4.4... -
Page 69: Figure 21: "Calibration" Parameters
WAGO I/O System 750 XTR Commissioning 750-471/040-000 4AI U/I Diff Galv XTR Figure 21: “Calibration” Parameters Table 43: Calibration Parameters Selection/Control Field Possible settings User calibration When user calibration is switched on, the user can enter values for offset and gain. -
Page 70: Figure 22: Offset Correction
Commissioning WAGO I/O System 750 XTR 750-471/040-000 4AI U/I Diff Galv XTR The calibration process is independent of the set signal type! User calibration follows the same principle as the current and voltage measurement. The content of the dialog windows differs accordingly! To select the process value for the respective channel, select the corresponding tab [Channel 1] ... -
Page 71: Configuration And Parameterization Via Gsd File
(GSD file). Configuration and Parameterization via GSD File Behavior after Overwriting with WAGO-I/O-CHECK! If WAGO-I/O-CHECK is used to overwrite a parameterization made with the GSD file, the I/O module operates with the WAGO-I/O-CHECK settings until the 750-333/040-000 Fieldbus Couplers are restarted. -
Page 72: 4Ai U/I Diff/Galv Parameterization
Commissioning WAGO I/O System 750 XTR 750-471/040-000 4AI U/I Diff Galv XTR 7.2.2 4AI U/I Diff/Galv Parameterization Except for the user limit values and the user scaling, the GSD file can be used to provide the I/O module on the PROFIBUS DP fieldbus device with all operating parameters. -
Page 73: All Profibus Dp And Profinet Io Fieldbus Couplers/Controllers
… 32767 −32768 … 0 … 32767 Offset Offset −32768 … 16384 … −2.0000 … 1.0000 … Gain Gain 32767 1.9999 Default setting only PROFINET IO couplers The resolution 1/16384 is already taken into account in WAGO-I/O-CHECK. Manual Version 1.0.2... -
Page 74: Profibus Dp Fieldbus Couplers 750-333/040-000
Commissioning WAGO I/O System 750 XTR 750-471/040-000 4AI U/I Diff Galv XTR 7.2.2.2 PROFIBUS DP Fieldbus Couplers 750-333/040-000 The aforementioned fieldbus couplers allow channel-specific parameterization of behavior at diagnosis. Table 46: General Module/Channel Parameters Parameter Value Explanation Diagnosis The fieldbus coupler signals a diagnosis, if at least Channel x (x = 0…3) -
Page 75: Scaling Measured Values
WAGO I/O System 750 XTR Commissioning 750-471/040-000 4AI U/I Diff Galv XTR </dg_ Scaling Measured Values User scaling serves to adjust the process values. When user scaling is used, the required accuracy of the process value resolution is changed, but not fundamentally limited. -
Page 76: Diagnostics
You can activate or deactivate these diagnostics separately in WAGO-I/O-CHECK (see section “Startup” > … > “Parameterization with WAGO-I/O-CHECK”). The I/O module only allows one error to be indicated. A dedicated bit in the status byte is assigned to each error. -
Page 77: Table 49: Behavior In The Event Of An I/O Module Error Dependent On The
WAGO I/O System 750 XTR Diagnostics 750-471/040-000 4AI U/I Diff Galv XTR Table 49: Behavior in the Event of an I/O Module Error Dependent on the Configuration Configuration I/O module behavior I/O module behavior Wire break/ / Underrange/ for wire break/... - Page 78 Diagnostics WAGO I/O System 750 XTR 750-471/040-000 4AI U/I Diff Galv XTR Note how long diagnostics are displayed! A diagnosed error status is displayed at least 200 ms even if the detected error status is no longer present in this period. If a higher-priority error status occurs in this period, the higher-priority error status is displayed for 200 ms and the lower- priority error status is lost.
-
Page 79: Firmware Update
Firmware Update You can update firmware on the Series 750 I/O Modules with the software “WAGO I/O-Update 750.” The I/O modules can be updated via the service interface or, for ETHERNET-based fieldbuses, via the fieldbus connection on the fieldbus coupler/controller. -
Page 80: Use In Hazardous Environments
WAGO I/O System 750 XTR 750-471/040-000 4AI U/I Diff Galv XTR Use in Hazardous Environments The WAGO I/O System 750 (electrical equipment) is designed for use in Zone 2 hazardous areas and shall be used in accordance with the marking and installation regulations. -
Page 81: Marking Configuration Examples
WAGO I/O System 750 XTR Use in Hazardous Environments 750-471/040-000 4AI U/I Diff Galv XTR Marking Configuration Examples 9.1.1 Marking for Europe According to ATEX and IECEx Figure 25: Marking Example per ATEX and IECEx Figure 26: Text Detail – Marking Example per ATEX and IECEx Manual Version 1.0.2... -
Page 82: Table 50: Description Of The Marking Example Per Atex And Iecex
Use in Hazardous Environments WAGO I/O System 750 XTR 750-471/040-000 4AI U/I Diff Galv XTR Table 50: Description of the Marking Example per ATEX and IECEx Marking Text Description TUEV 07 ATEX 554086 X Approving authority or certificate numbers IECEx TUN 09.0001 X... -
Page 83: Figure 27: Marking Example Of An Approved I/O Module Ex I Per Atex And
WAGO I/O System 750 XTR Use in Hazardous Environments 750-471/040-000 4AI U/I Diff Galv XTR Figure 27: Marking Example of an Approved I/O Module Ex i per ATEX and IECEx Figure 28: Text Detail – Marking Example of an Approved I/O Module Ex i... -
Page 84: Table 51: Description Of The Marking Example Of An Approved I/O Module Ex I Per Atex And Iecex
Use in Hazardous Environments WAGO I/O System 750 XTR 750-471/040-000 4AI U/I Diff Galv XTR Table 51: Description of the Marking Example of an Approved I/O Module Ex i per ATEX and IECEx Marking Text Description TUEV 12 ATEX 106032 X... -
Page 85: Marking For The United States Of America (Nec) And Canada (Cec)
WAGO I/O System 750 XTR Use in Hazardous Environments 750-471/040-000 4AI U/I Diff Galv XTR 9.1.2 Marking for the United States of America (NEC) and Canada (CEC) Figure 29: Marking Example According to NEC Figure 30: Text Detail – Marking Example According to NEC 500... -
Page 86: Figure 31: Text Detail - Marking Example For Approved I/O Module Ex I
Use in Hazardous Environments WAGO I/O System 750 XTR 750-471/040-000 4AI U/I Diff Galv XTR Figure 31: Text Detail – Marking Example for Approved I/O Module Ex i According to NEC 505 Table 53: Description of Marking Example for Approved I/O Module Ex i According to NEC 505... -
Page 87: Figure 33: Text Detail - Marking Example For Approved I/O Module Ex I
WAGO I/O System 750 XTR Use in Hazardous Environments 750-471/040-000 4AI U/I Diff Galv XTR Figure 33: Text Detail – Marking Example for Approved I/O Module Ex i According to CEC 18 attachment J Table 55: Description of Marking Example for Approved I/O Module Ex i According to CEC 18... -
Page 88: Installation Regulations
Use in Hazardous Environments WAGO I/O System 750 XTR 750-471/040-000 4AI U/I Diff Galv XTR Installation Regulations For the installation and operation of electrical equipment in hazardous areas, the valid national and international rules and regulations which are applicable at the installation location must be carefully followed. - Page 89 WAGO I/O System 750 XTR Use in Hazardous Environments 750-471/040-000 4AI U/I Diff Galv XTR Explosive atmosphere occurring simultaneously with assembly, installation or repair work must be ruled out. Among other things, these include the following activities • Insertion and removal of components •...
-
Page 90: Special Notes Regarding Ul Hazardous Location
Use in Hazardous Environments WAGO I/O System 750 XTR 750-471/040-000 4AI U/I Diff Galv XTR 9.2.2 Special Notes Regarding UL Hazardous Location For UL Hazardous Location acc. to UL File E198726, the following additional requirements apply: • Use in Class I, Division 2, Group A, B, C, D or non-hazardous areas only •... -
Page 91: List Of Figures
Figure 11: Connecting a Conductor to a CAGE CLAMP ® ........56 Figure 12: Connection Example 750-471/040-000 ..........57 Figure 13: Starting the Parameterization Dialog From WAGO-I/O-CHECK ..58 Figure 14: WAGO-I/O-CHECK User Interface ............60 Figure 15: Parameterization Dialog ..............61 Figure 16: Toolbar ....................61 Figure 17: Navigation ..................62... -
Page 92: List Of Tables
List of Tables WAGO I/O System 750 XTR 750-471/040-000 4AI U/I Diff Galv XTR List of Tables Table 1: Number Notation ..................10 Table 2: Font Conventions .................10 Table 3: Compatibility List 750-471/040-000 ............19 Table 4: Legend for Figure “View” ..............21 Table 5: Legend for Figure “Power Jumper Contacts”... - Page 93 WAGO I/O System 750 XTR List of Tables 750-471/040-000 4AI U/I Diff Galv XTR Table 40: "General" Parameters .................64 Table 41: Parameter „Channel“ ................65 Table 42: “Scaling” Parameters ................67 Table 43: Calibration Parameters ...............69 Table 44: PROFIBUS DP Configuration .............71 Table 45: Specific Module/Channel Parameters for 750-471/040-000 ....73...
- Page 94 WAGO GmbH & Co. KG Postfach 2880 • D - 32385 Minden Hansastraße 27 • D - 32423 Minden Phone: +49 571 887 – 0 Fax: +49 571 887 – 844169 E-Mail: info@wago.com Internet: www.wago.com...