WAGO -I/O-SYSTEM 750 XTR Manual
  1. Manuals
  2. Brands
  3. WAGO Manuals
  4. I/O Systems
  5. WAGO-I/O-SYSTEM 750 XTR Series
  6. Manual
WAGO -I/O-SYSTEM 750 XTR Manual

WAGO -I/O-SYSTEM 750 XTR Manual

4ao 0-10v dc /xtr 4-channel analog output module, 0-10 vdc /xtr
Hide thumbs Also See for WAGO-I/O-SYSTEM 750 XTR:
Table of Contents

  • Deutsch
    • Table of Contents

    • 1 Notes about this Documentation
      • Validity of this Documentation
      • Copyright
      • Symbols
      • Number Notation
      • Font Conventions
      • Table 1: Number Notation
      • Table 2: Font Conventions

    • 2 Important Notes
      • Legal Bases
      • Subject to Changes
      • Personnel Qualifications
      • Use of the WAGO-I/O-SYSTEM 750 in Compliance with Underlying Provisions
      • Technical Condition of Specified Devices
      • Safety Advice (Precautions)

    • 3 Device Description
      • View
      • Table 3: Legend for Figure "View
      • Connectors
      • Data Contacts/Internal Bus
      • Power Jumper Contacts/Field Supply
      • Table 4: Legend for Figure "Power Jumper Contacts
      • CAGE CLAMP ® Connectors
      • Table 5: Legend for Figure "CAGE CLAMP ® Connectors
      • Display Elements
      • Operating Elements
      • Table 6: Legend for Figure "Display Elements
      • Schematic Diagram
      • Technical Data
      • Device
      • Supply
      • Communication
      • Table 7: Technical Data - Device
      • Table 8: Technical Data - Supply
      • Table 9: Technical Data - Communication
      • Outputs
      • Connection Type
      • Mechanical Conditions
      • Climatic Environmental Conditions
      • Table 10: Technical Data - Outputs
      • Table 11: Technical Data - Field Wiring
      • Table 12: Technical Data - Power Jumper Contacts
      • Table 13: Technical Data - Data Contacts
      • Table 14: Technical Data - Mechanical Conditions
      • Table 15: Technical Data - Climatic Environmental Conditions
      • Approvals
      • Standards and Guidelines
      • Table 16: Climatic and Mechanical Environmental Conditions
      • Table 17: EMC - Immunity to Interference
      • Table 18: EMC - Emission of Interference

    • 4 Process Image
      • Table 19: Process Image

    • 5 Mounting
      • Mounting Sequence
      • Inserting and Removing Devices
      • Inserting the I/O Module
      • Removing the I/O Module

    • 6 Connect Devices
      • Connecting a Conductor to the CAGE CLAMP
      • Connection Example

    • 7 Use in Hazardous Environments
      • Marking Configuration Examples
      • Marking for Europe According to ATEX and IEC-Ex
      • Table 20: Description of Marking Example for Approved I/O Modules According to ATEX and Iecex
      • Table 21: Description of Marking Example for Approved Ex I I/O Modules According to ATEX and Iecex
      • Marking for America According to NEC 500
      • Table 22: Description of Marking Example for Approved I/O Modules
      • Installation Regulations
      • Special Conditions for Safe Use (TÜV 14 ATEX 148929 X)
      • Special Conditions for Safe Use (ATEX Certificate TÜV 12 ATEX 106032 X)
      • Special Conditions for Safe Use (IEC-Ex Certificate TUN 14.0035X)
      • Special Conditions for Safe Use (IEC-Ex Certificate Iecex TUN 12.0039 X)
      • Special Conditions for Safe Use According to ANSI/ISA 12.12.01

  • English
    • Figure 1: View
    • Figure 2: Data Contacts
    • Figure 3: Power Jumper Contacts
    • Figure 4: CAGE CLAMP ® Connectors
    • Figure 5: Display Elements
    • Figure 6: Schematic Diagram
    • Figure 7: Insert I/O Module (Example)
    • Figure 8: Snap the I/O Module into Place (Example)
    • Figure 9: Removing the I/O Module (Example)
    • Figure 10: Connecting a Conductor to a CAGE CLAMP
    • Figure 11: Connecting Diagram
    • Figure 12: Side Marking Example for Approved I/O Modules According to ATEX and Iecex
    • Figure 13: Text Detail - Marking Example for Approved I/O Modules According to ATEX and Iecex
    • Figure 14: Side Marking Example for Approved Ex I I/O Modules According to ATEX and Iecex
    • Figure 15: Text Detail - Marking Example for Approved Ex I I/O Modules According to ATEX and Iecex
    • Figure 16: Side Marking Example for I/O Modules According to NEC 500
    • Figure 17: Text Detail - Marking Example for Approved I/O Modules

    • List of Figures

    • List of Tables

Advertisement

Quick Links

WAGO-I/O-SYSTEM 750 XTR
Pos : 2 /D okumentati on allgemein/Ei nband/Ei nband H andbuch - Fronts eite 2015 - mit Doc Variabl en (Standar d) @ 9\mod_1285229289866_0.doc x @ 64941 @ @ 1
Manual
750-559/040-000
4AO 0-10V DC /XTR
4-Channel Analog Output Module, 0-10 VDC /XTR
Version 1.2.0
Pos : 3 /Alle Serien (Allgemeine M odul e)/Rec htlic hes, Allgemei nes/Impressum für Standardhandbüc her - allg. Angaben, Ansc hriften, T elefonnummer n und E-Mail-Adres sen @ 3\mod_1219151118203_21.doc x @ 21060 @ @ 1

Advertisement

Chapters

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WAGO-I/O-SYSTEM 750 XTR and is the answer not in the manual?

Questions and answers

Related Manuals for WAGO WAGO-I/O-SYSTEM 750 XTR

Summary of Contents for WAGO WAGO-I/O-SYSTEM 750 XTR

  • Page 1 WAGO-I/O-SYSTEM 750 XTR Pos : 2 /D okumentati on allgemein/Ei nband/Ei nband H andbuch - Fronts eite 2015 - mit Doc Variabl en (Standar d) @ 9\mod_1285229289866_0.doc x @ 64941 @ @ 1 Manual 750-559/040-000 4AO 0-10V DC /XTR 4-Channel Analog Output Module, 0-10 VDC /XTR Version 1.2.0...
  • Page 2 WAGO-I/O-SYSTEM 750 XTR 750-559/040-000 4AO 0-10V DC /XTR © 2016 by WAGO Kontakttechnik GmbH & Co. KG All rights reserved. WAGO Kontakttechnik GmbH & Co. KG Hansastraße 27 D-32423 Minden Phone: +49 (0) 571/8 87 – 0 Fax: +49 (0) 571/8 87 – 1 69 E-Mail: info@wago.com...

  • Page 3: Table Of Contents

    2.1.1 Subject to Changes ................9 2.1.2 Personnel Qualifications ............... 9 2.1.3 Use of the WAGO-I/O-SYSTEM 750 in Compliance with Underlying Provisions ................9 2.1.4 Technical Condition of Specified Devices ......... 10 Safety Advice (Precautions) ..............11 Device Description ..................13 View ......................
  • Page 4 Table of Contents WAGO-I/O-SYSTEM 750 XTR 750-559/040-000 4AO 0-10V DC /XTR 7.1.1 Marking for Europe According to ATEX and IEC-Ex ...... 37 7.1.2 Marking for America According to NEC 500 ........42 Installation Regulations ................43 7.2.1 Special Conditions for Safe Use (TÜV 14 ATEX 148929 X) ..............

  • Page 5: Notes About This Documentation

    Validity of this Documentation Pos : 10 /Serie 750 ( WAGO-I/O-SYST EM)/Hi nweis e z ur D okumentati on/Gültigkeits bereic h/Gültig keits ber eich Dokumentation Bus kl emme 750- xxxx, ohne Variantenangabe @ 14\mod_1358944037947_21.doc x @ 109346 @ @ 1 This documentation is only applicable to the I/O module 750-559/040-000 (4AO 0-10V DC /XTR).

  • Page 6: Symbols

    Notes about this Documentation WAGO-I/O-SYSTEM 750 XTR 750-559/040-000 4AO 0-10V DC /XTR Pos : 12.4 /All e Seri en ( Allgemei ne Module)/Ü bers chriften/N eue Ü berschriften/Ebene 2Symbol e - Ü bersc hrift 2 @ 13\mod_1351068042408_21.doc x @ 105270 @ 2 @ 1 Symbols Pos : 12.5.1 /All e Serien ( Allgemei ne Module)/Sicherheits- und sons tige Hi nweis e/Gefahr/Gefahr: _War nung vor Pers onenschäden allgemei n_ - Erläuter ung @ 13\mod_1343309450020_21.doc x @ 101029 @ @ 1...
  • Page 7 WAGO-I/O-SYSTEM 750 XTR Notes about this Documentation 750-559/040-000 4AO 0-10V DC /XTR Additional Information: Refers to additional information which is not an integral part of this documentation (e.g., the Internet). Pos : 12.6 /Dokumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1 Manual Version 1.2.0...

  • Page 8: Number Notation

    Notes about this Documentation WAGO-I/O-SYSTEM 750 XTR 750-559/040-000 4AO 0-10V DC /XTR Pos : 12.7 /All e Seri en ( Allgemei ne Module)/Ü bers chriften/Ebene 2/D arstellung der Z ahlens ys teme - Ü bers chrift 2 @ 23\mod_1435647128078_21.doc x @ 184811 @ 2 @ 1 Number Notation Pos : 12.8 /All e Seri en ( Allgemei ne Module)/R ec htliches , Allgemei nes /Zahlens ysteme @ 3\mod_1221059454015_21.doc x @ 21711 @ @ 1...

  • Page 9: Important Notes

    PLC programming. Pos : 15.5 /Serie 750 (WAGO-I/O-SYST EM)/Wic htige Erläuterungen/Bes timmungsgemäß e Verwendung Bes ti mmungsgemäße Verwendung 750-xxxx - Ü berschrift 3 und Inhal t @ 3\mod_1224064151234_21.doc x @ 24070 @ 3 @ 1 2.1.3...

  • Page 10: Technical Condition Of Specified Devices

    WAGO-I/O-SYSTEM 750 XTR 750-559/040-000 4AO 0-10V DC /XTR Appropriate housing (per 2014/34/EU) is required when operating the WAGO- I/O-SYSTEM 750 in hazardous environments. Please note that a prototype test certificate must be obtained that confirms the correct installation of the system in a housing or switch cabinet.

  • Page 11: Safety Advice (Precautions)

    Pos : 15.10.2 /Serie 750 ( WAGO-I/O- SYST EM)/Wic htig e Erl äuter ung en/Sic her hei ts- und s onstige Hi nweise/Gefahr/Gefahr: Ei nbau 0750- xxxx nur i n Gehäus en, Sc hränken oder el ektrisc hen Betriebsräumen! @ 6\mod_1260180556692_21.doc...
  • Page 12 Pos : 15.13 /Serie 750 ( WAGO-I/O-SYST EM)/Wichtig e Erl äuter ung en/Sic her hei ts- und s onstige Hinweise/Ac htung/Ac htung: XTR - Is olations prüfungen mit DC durchführen! @ 15\mod_1370843209441_21.doc x @ 122210 @ @ 1...

  • Page 13: Device Description

    Pos : 19.11 /Serie 750 ( WAGO-I/O-SYST EM)/Wichtig e Erl äuter ung en/Sic her hei ts- und s onstige Hinweise/Ac htung/Ac htung: Maxi maler Str om Leis tungs kontakte 10 A @ 3\mod_1226499143500_21.doc x @ 25029 @ @ 1 Do not exceed maximum current via power jumper contacts! The maximum current to flow through the power jumper contacts is 10 A.
  • Page 14 Pos : 19.16 /Serie 750 ( WAGO-I/O-SYST EM)/Gerätebeschr eibung/Ei nleitung/Einsatzbereic h/Einsatzbereic h 750- xxxx/040-000 alle XTR-Koppl er/Ei ns atz ber eich 750- xxxx/040- 000 alle XTR- Koppl er/-Contr oller ohne Einsc hr änkung @ 15\mod_1368425919479_21.doc...

  • Page 15: View

    Figure 1: View Pos : 21.3 /Serie 750 (WAGO-I/O-SYST EM)/Ger ätebesc hrei bung/Ansic ht/Ansic ht C ageCl amp® _Legende mit LEDs , mit 1 Entrieg elungslasc he @ 15\mod_1370867188922_21.doc x @ 122225 @ @ 1 Table 3: Legend for Figure “View”...

  • Page 16: Connectors

    Figure 2: Data Contacts Pos : 21.7.2 /Serie 750 (WAGO-I/O-SYST EM)/Wichtige Erläuterungen/Sic herheits- und sonstige Hinweis e/Achtung/Achtung: Bus kl emmen nic ht auf Gol dfeder kontakte leg en! @ 7\mod_1266318463636_21.doc x @ 50695 @ @ 1 Do not place the I/O modules on the gold spring contacts!

  • Page 17: Power Jumper Contacts/Field Supply

    Pos : 21.10.1 /Serie 750 ( WAGO-I/O- SYST EM)/Wic htig e Erl äuter ung en/Sic her hei ts- und s onstige Hi nweise/Vorsicht/Vorsic ht: Verletzungsgefahr durc h sc har fkantige Mes ser kontakte! @ 6\mod_1256193279401_21.doc...
  • Page 18 Device Description WAGO-I/O-SYSTEM 750 XTR 750-559/040-000 4AO 0-10V DC /XTR Use supply modules for ground (earth)! The I/O module has no power jumper contacts for receiving and transmitting the earth potential. Use a supply module when an earth potential is needed for the subsequent I/O modules.

  • Page 19: Cage Clamp ® Connectors

    (ground) Pos : 21.14 /Serie 750 ( WAGO-I/O-SYST EM)/Wichtig e Erl äuter ung en/Sic her hei ts- und s onstige Hinweise/Hinweis/Hi nweis : Gesc hir mte Sig nallei tungen ver wenden! @ 7\mod_1265723251019_21.doc x @ 50140 @ @ 1 Use shielded signal lines! Only use shielded signal lines for analog signals and I/O modules which are equipped with shield clamps.

  • Page 20: Display Elements

    Pos : 21.17 /Alle Serien (Allgemeine M odul e)/Übersc hriften/Neue Ü bersc hriften/Ebene 2Anz eigeelemente - Übersc hrift 2 @ 4\mod_1240984390875_21.doc x @ 31964 @ 2 @ 1 Display Elements Pos : 21.18 /Serie 750 ( WAGO-I/O-SYST EM)/Gerätebeschr eibung/Anzeig eel emente/Anal ogausgangs kl emmen/Anzeig eel emente 750-05xx/040- xxx 4AO ( Agn, Cr t) @ 17\mod_1380641377218_21.doc x @ 133466 @ @ 1 Figure 5: Display Elements Table 6: Legend for Figure “Display Elements”...

  • Page 21: Schematic Diagram

    Pos : 21.22 /Alle Serien (Allgemeine M odul e)/Übersc hriften/Neue Ü bersc hriften/Ebene 2Schematisc hes Sc haltbild - Ü berschrift 2 @ 4\mod_1240984441312_21.doc x @ 31967 @ 2 @ 1 Schematic Diagram Pos : 21.23 /Serie 750 ( WAGO-I/O-SYST EM)/Gerätebeschr eibung/Sc hematis che Sc haltbilder/Analog ausg angs kl emmen/Sc hematisc hes Schaltbild 750- 0559/040- xxx @ 17\mod_1380712534380_21.doc x @ 133611 @ @ 1 Figure 6: Schematic Diagram Pos : 21.24 /D okumentati on allgemei n/Gli ederungsel emente/---Seitenwec hs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1...

  • Page 22: Technical Data

    4 × 8 bits control/status (optional) Pos : 21.26.4 /Serie 750 ( WAGO-I/O- SYST EM)/Gerätebeschr eibung/Tec hnische D aten/Analog ausg angs kl emmen/T ec hnisc he D aten 750-0559/T ec hnis che D aten 750-0559/040- xxx @ 17\mod_1380710481106_21.doc x @ 133603 @ 3 @ 1 Manual Version 1.2.0...

  • Page 23: Outputs

    Follow the installation instructions Pos : 21.26.7 /Serie 750 ( WAGO-I/O- SYST EM)/Gerätebeschr eibung/Tec hnische D aten/VS ( Vari abl ensteuerung)/Tec hnische D aten kli matisc he Umweltbedi ngungen (VS) - XTR @ 15\mod_1369387559187_21.doc x @ 120360 @ 3 @ 1 3.6.7...

  • Page 24: Approvals

    Pos : 21.29.12 /D okumentation allgemein/Gliederungselemente/------Leerzeile------ @ 3\mod_1224662755687_0.doc x @ 24460 @ @ 1 Pos : 21.29.13 /Seri e 750 ( WAGO-I/O-SYSTEM)/Ger ätebesc hrei bung/Z ulas sungen/Schi ff/Einl eitungss ätz eZ ulas sungen Bus kl emme 750- xxxx Sc hiff, ohne Variantenangabe - Ei nleitung @ 4\mod_1237190918453_21.doc x @ 28420 @ @ 1 The following ship approvals have been granted to 750-559/040-000 I/O modules: Pos : 21.29.14 /Alle Seri en (Allgemeine M odule)/Zul ass ung en/Sc hiffs zul ass ung en/GL (Ger manisc her Ll oyd) C at.
  • Page 25 WAGO-I/O-SYSTEM 750 XTR Device Description 750-559/040-000 4AO 0-10V DC /XTR Federal Maritime and Hydrographic Agency Pos : 21.29.17.3 /Alle Seri en (Allgemeine D okumente) (Allgemeine M odule)/Z ul ass ungen/Sc hiffs zul ass ung en/BV (Bureau Veritas) @ 3\mod_1224492116171_0.doc x @ 24220 @ @ 1 BV (Bureau Veritas) Pos : 21.29.17.4 /Alle Seri en (Allgemeine D okumente) (Allgemeine M odule)/Z ul ass ungen/Sc hiffs zul ass ung en/DNV (D et Nors ke Veritas) Cl ass B @ 3\mod_1224492540562_0.doc x @ 24224 @ @ 1...

  • Page 26: Standards And Guidelines

    Standards and Guidelines Pos : 21.31.1 /Serie 750 ( WAGO-I/O- SYST EM)/Gerätebeschr eibung/N or men und Richtlinien/N or men und Richtlinien Bus klemme 750- xxxx, ohne Variantenangabe - Ei nlei tung @ 7\mod_1274278887584_21.doc x @ 56645 @ @ 1 750-559/040-000 I/O modules meet the following standards and guidelines: Pos : 21.31.2 /Serie 750 ( WAGO-I/O- SYST EM)/Gerätebeschr eibung/N or men und Richtlinien/N or men und Richtlinien XTR - M ec hani k und Kli ma Komponenten-HB @ 18\mod_1394633219581_21.doc x @ 147751 @ @ 1...

  • Page 27: Table 17: Emc - Immunity To Interference

    Pos : 21.31.4 /Serie 750 ( WAGO-I/O- SYST EM)/Gerätebeschr eibung/N or men und Richtlinien/EMV-N or men C ontroll er 750-xxxx/EMV-N ormen Bus kl emme 750- xxxx/0040- 0000, nur Standardversion - Ei nleitung XTR @ 18\mod_1395909426189_21.doc...

  • Page 28: Table 18: Emc - Emission Of Interference

    The list of ship certifications issued is available in the section “Approvals”. Pos : 21.31.6 /Serie 750 ( WAGO-I/O- SYST EM)/Gerätebeschr eibung/N or men und Richtlinien/N or men Störauss endung XTR @ 18\mod_1394087664442_21.doc x @ 147358 @ @ 1 Table 18: EMC – Emission of Interference...
  • Page 29 WAGO-I/O-SYSTEM 750 XTR Device Description 750-559/040-000 4AO 0-10V DC /XTR Table 18: EMC – Emission of Interference Standard Test Value Conducted Emission of Interference – Line Connection AC Voltage • EN 61000-6-3 + A1 Standard not applicable • EN 55022 Class B •...

  • Page 30: Process Image

    Process Image Pos : 24 /Serie 750 ( WAGO-I/O-SYST EM)/Proz ess abbild Kl emmenbus /Hinweis: Prozes sabbildmapping abhängig von FBK/PFC, ohne Status-/C ontr olbyte XTR @ 18\mod_1396511070508_21.doc x @ 150676 @ @ 1 Mapping of process data in the process image of fieldbus systems The representation of the process data of some I/O modules or their variations in the process image depends on the fieldbus coupler/controller used.

  • Page 31: Mounting

    I/O modules with fewer power contacts. Pos : 29.2 /Serie 750 (WAGO-I/O-SYST EM)/Wic htige Erläuterungen/Sicherheits- und sonstig e Hinweis e/Vorsic ht/Vorsicht: Verl etz ungsgefahr durc h s charfkantige M ess er kontakte! @ 6\mod_1256193279401_21.doc x @ 43414 @ @ 1 Risk of injury due to sharp-edged blade contacts! The blade contacts are sharp-edged.

  • Page 32: Inserting And Removing Devices

    Pos : 29.10 /Serie 750 ( WAGO-I/O-SYST EM)/Wichtig e Erl äuter ung en/Sic her hei ts- und s onstige Hinweise/Ac htung/Ac htung: XTR nic ht unter -20 °C verdr ahten oder umstec ken @ 15\mod_1367559895186_21.doc...

  • Page 33: Removing The I/O Module

    (if any) to the fieldbus coupler/controller or to the previous or possibly subsequent I/O module are established. Pos : 29.12 /Serie 750 ( WAGO-I/O-SYST EM)/Monti eren/D emonti eren/Bus kl emme entfer nen @ 4\mod_1239169375203_21.doc x @ 30334 @ 3 @ 1 5.2.2 Removing the I/O Module Remove the I/O module from the assembly by pulling the release tab.

  • Page 34: Connect Devices

    Failure to observe these measures can damage the product! Pos : 33 /Serie 750 ( WAGO-I/O-SYST EM)/Ans chli eßen/Leiter an C AGE C LAM P ans chli eßen ( allgemei n) - Übersc hrift 2 und Text @ 3\mod_1225448660171_21.doc x @ 24928 @ 2 @ 1 ®...

  • Page 35: Connection Example

    Pos : 35 /All e Seri en (Allgemei ne Module)/Ü berschriften/N eue Ü berschriften/Ebene 2Anschl uss beispi el - Ü bersc hrift 2 @ 4\mod_1242621672468_21.doc x @ 33293 @ 2 @ 1 Connection Example Pos : 36 /Serie 750 ( WAGO-I/O-SYST EM)/Wic htige Erläuterungen/Sicherheits- und sonstig e Hinweis e/Hi nweis /Hinweis: Geschir mte Signalleitung en ver wenden! @ 7\mod_1265723251019_21.doc x @ 50140 @ @ 1 Use shielded signal lines! Only use shielded signal lines for analog signals and I/O modules which are equipped with shield clamps.

  • Page 36: Use In Hazardous Environments

    Use in Hazardous Environments Pos : 40.2 /Serie 750 (WAGO-I/O-SYST EM)/Eins atz in Ex- Ber eichen/Ei ns atz ber eich Serie 750 @ 3\mod_1234272230203_21.doc x @ 27500 @ @ 1 The WAGO-I/O-SYSTEM 750 (electrical equipment) is designed for use in Zone 2 hazardous areas.

  • Page 37: Marking Configuration Examples

    Marking for Europe According to ATEX and IEC-Ex Pos : 40.6 /Serie 750 (WAGO-I/O-SYST EM)/Eins atz in Ex- Ber eichen/Beis piel bedruc kung der ATEX- und IEC- Ex-zug elass enen Bus klemmen gemäß C ENELEC und IEC_2013 @ 14\mod_1360569228625_21.doc x @ 111294 @ @ 1 Figure 12: Side Marking Example for Approved I/O Modules According to ATEX and IECEx Figure 13: Text Detail –...

  • Page 38: Table 20: Description Of Marking Example For Approved I/O Modules According To Atex And Iecex

    Use in Hazardous Environments WAGO-I/O-SYSTEM 750 XTR 750-559/040-000 4AO 0-10V DC /XTR Table 20: Description of Marking Example for Approved I/O Modules According to ATEX and IECEx Printing on Text Description TÜV 07 ATEX 554086 X Approving authority and certificate numbers IECEx TUN 09.0001 X...

  • Page 39: Figure 14: Side Marking Example For Approved Ex I I/O Modules According To Atex And Iecex

    750-559/040-000 4AO 0-10V DC /XTR Pos : 40.8 /Serie 750 (WAGO-I/O-SYST EM)/Eins atz in Ex- Ber eichen/Beis piel bedruc kung der Ex-i- und IEC-Ex-i-zug elas senen Bus klemmen gemäß C ENELEC und IEC _2013 @ 14\mod_1360569320118_21.doc x @ 111298 @ @ 1 Figure 14: Side Marking Example for Approved Ex i I/O Modules According to ATEX and IECEx.
  • Page 40 Use in Hazardous Environments WAGO-I/O-SYSTEM 750 XTR 750-559/040-000 4AO 0-10V DC /XTR Table 21: Description of Marking Example for Approved Ex i I/O Modules According to ATEX and IECEx Inscription Text Description TÜV 07 ATEX 554086 X Approving authority and certificate numbers IECEx TUN 09.0001X...

  • Page 41: Table 21: Description Of Marking Example For Approved Ex I I/O Modules According To Atex And Iecex

    WAGO-I/O-SYSTEM 750 XTR Use in Hazardous Environments 750-559/040-000 4AO 0-10V DC /XTR Table 21: Description of Marking Example for Approved Ex i I/O Modules According to ATEX and IECEx Gases Equipment group: All except mining 3(1)G Category 3 (Zone 2) equipment containing a safety...

  • Page 42: Marking For America According To Nec 500

    750-559/040-000 4AO 0-10V DC /XTR Pos : 40.10 /Serie 750 ( WAGO-I/O-SYST EM)/Ei ns atz i n Ex-Bereic hen/Kennz eichnung für Ameri ka gemäß N EC 500 - Übersc hrift 3 @ 3\mod_1224158423187_21.doc x @ 24188 @ 3 @ 1 7.1.2...

  • Page 43: Installation Regulations

    WAGO-I/O-SYSTEM 750 XTR Use in Hazardous Environments 750-559/040-000 4AO 0-10V DC /XTR Pos : 40.13 /Alle Serien (Allgemeine M odul e)/Übersc hriften/Ebene 2Erric htungs bes timmungen - Ü bersc hrift 2 @ 3\mod_1232453624234_21.doc x @ 26370 @ 2 @ 1 Installation Regulations Pos : 40.14 /Alle Serien (Allgemeine M odul e)/Ei ns atz i n Ex-Bereic hen/Errichtungsbes timmungen Ei nleitung_2013 @ 14\mod_1360582328318_21.doc x @ 111371 @ @ 1...

  • Page 44: Special Conditions For Safe Use (Tüv 14 Atex 148929 X)

    Pos : 40.16 /Serie 750 ( WAGO-I/O-SYST EM)/Ei ns atz i n Ex-Bereic hen/Besonder e Beding ung en für den sic her en Ex- Betrieb gem. AT EX-Z ertifi kat TÜV 14 ATEX 148929_X @ 21\mod_1416995371807_21.doc...

  • Page 45: Special Conditions For Safe Use (Atex Certificate Tüv 12 Atex 106032 X)

    Pos : 40.18 /Serie 750 ( WAGO-I/O-SYST EM)/Ei ns atz i n Ex-Bereic hen/Besonder e Beding ung en für den sic her en Ex- Betrieb gem. AT EX-Z ertifi kat TÜV 12 ATEX 106032x_2013_2 @ 15\mod_1368620479454_21.doc...

  • Page 46: Special Conditions For Safe Use (Iec-Ex Certificate Tun 14.0035X)

    Pos : 40.20 /Serie 750 ( WAGO-I/O-SYST EM)/Ei ns atz i n Ex-Bereic hen/Besonder e Beding ung en für den sic her en Ex- Betrieb gem. IEC-Ex-Z ertifi kat TUN 14.0035 X_2014 @ 21\mod_1416995779884_21.doc...

  • Page 47: Special Conditions For Safe Use (Iec-Ex Certificate Iecex Tun 12.0039 X)

    Pos : 40.22 /Serie 750 ( WAGO-I/O-SYST EM)/Ei ns atz i n Ex-Bereic hen/Besonder e Beding ung en für den sic her en Ex- Betrieb gem. IEC-Ex-Z ertifi kat TUN 12.0039 X_2013_2 @ 15\mod_1368620821493_21.doc...

  • Page 48: Special Conditions For Safe Use According To Ansi/Isa 12.12.01

    WAGO-I/O-SYSTEM 750 XTR 750-559/040-000 4AO 0-10V DC /XTR Pos : 40.24 /Serie 750 ( WAGO-I/O-SYST EM)/Ei ns atz i n Ex-Bereic hen/Errichtungsbesti mmung en AN SI ISA 12.12.01_2013_2_für 750-439, -633, - 663/000-003 @ 21\mod_1417518338537_21.doc x @ 169812 @ 3 @ 1 7.2.5 Special Conditions for Safe Use according to ANSI/ISA 12.12.01...

  • Page 49: List Of Figures

    WAGO-I/O-SYSTEM 750 XTR List of Figures 750-559/040-000 4AO 0-10V DC /XTR Pos : 42 /D okumentation allgemei n/Verz eic hniss e/Abbil dungs verz eic hnis - Übersc hrift oG und Verz eichnis @ 3\mod_1219222916765_21.doc x @ 21080 @ @ 1 List of Figures Figure 1: View .......................

  • Page 50: List Of Tables

    List of Tables WAGO-I/O-SYSTEM 750 XTR 750-559/040-000 4AO 0-10V DC /XTR Pos : 44 /D okumentation allgemei n/Verz eic hniss e/Tabell enverz eichnis - Übersc hrift oG und Verz eichnis @ 3\mod_1219222958703_21.doc x @ 21084 @ @ 1 List of Tables Table 1: Number Notation ..................
  • Page 51 WAGO-I/O-SYSTEM 750 XTR 750-559/040-000 4AO 0-10V DC /XTR Pos : 46 /D okumentation allgemei n/Einband/Einband H andbuc h - Leers eite für durc h 2 teilbar e Seitenzahl (Standar ddr uc k) @ 3\mod_1219230851078_0.doc x @ 21123 @ @ 1 Manual Version 1.2.0...
  • Page 52 Pos : 47 /D okumentation allgemei n/Einband/Einband H andbuc h - R üc kseite 2015 @ 9\mod_1285229376516_21.doc x @ 64944 @ @ 1 WAGO Kontakttechnik GmbH & Co. KG Postfach 2880 • D-32385 Minden Hansastraße 27 • D-32423 Minden Phone: 05 71/8 87 –...

This manual is also suitable for:

750-559/040-000

Table of Contents