Pos : 15.16.7 /Alle Serien (Allgemeine M odul e)/Sic herheits- und s onstige Hinweise/Achtung/Ac htung: El ektr ostatisc he Entladung vermei den! - DIN EN 61340- 5-1/- 3 @ 6\mod_1260181364729_21.doc x @ 46759 @ @ 1

Avoid electrostatic discharge!

The devices are equipped with electronic components that may be destroyed by

electrostatic discharge when touched. Please observe the safety precautions

against electrostatic discharge per DIN EN 61340-5-1/-3. When handling the

devices, please ensure that environmental factors (personnel, work space and

packaging) are properly grounded.

Pos : 15.17 /Serie 750 ( WAGO-I/O-SYST EM)/Wichtig e Erl äuter ung en (alte Struktur)/Sic her heits- und s onstige Hi nweis e/Ac htung/Ac htung: XTR - Is olationspr üfung en mit DC durchführen! @ 15\mod_1370843209441_21.doc x @ 122210 @ @ 1

Use only direct current (DC) for insulation testing!

Both the system voltage and field voltage side are capacitively coupled to the

DIN-rail. If an I/O module is mounted on the DIN-rail, application of an AC voltage

between the DIN-rail and at least one of these two potentials can lead to the

destruction of the module.

Use only direct current (DC) for insulation testing. To avoid destroying the I/O

module, you must discharge it completely before applying the test voltage again.

Pos : 16 /D okumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1

Manual

Version 1.3.0

WAGO-I/O-SYSTEM 750 XTR

750-352/040-000 FC ETHERNET G3 XTR