Figure 30: Mounting Positions - WAGO -I/O-SYSTEM 750 XTR Manual

66 Mounting

Figure 30: Mounting Positions

Use an end stop in the case of vertical installation!
When mounting in the "vertical top" or "vertical bottom" mounting position, also
mount an end stop below the fieldbus node to protect the fieldbus node against
sliding.
WAGO item no. 249-116
WAGO item no. 249-117
WAGO item no. 249-197
Pos : 51.2 /Serie 750 (WAGO-I/O-SYST EM)/M ontieren/D emontieren/I/O-Modul e 750xxxx/0040xxxx 4g-5g @ 15\mod_1367558844291_21.doc x @ 118470 @ @ 1
Manual
Version 1.3.0
750-352/040-000 FC ETHERNET G3 XTR
End stop for DIN 35 rail, 6 mm wide
End stop for DIN 35 rail, 10 mm wide
End stop for DIN 35 rail, 14 mm wide
WAGO-I/O-SYSTEM 750 XTR