Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
Configured
Tagging
6.2.2 show vlan brief
This command displays a list of all configured VLANs.
Format
Modes
VLAN ID
VLAN Name
VLAN Type
6-12
Determines the configured degree of participation of this port
in this VLAN. The permissible values are:
Include - This port is always a member of this VLAN. This is
equivalent to registration fixed in the IEEE 802.1Q standard.
Exclude - This port is never a member of this VLAN. This is
equivalent to registration forbidden in the IEEE 802.1Q stan-
dard.
Autodetect - Specifies to allow the port to be dynamically
registered in this VLAN via GVRP. The port will not partici-
pate in this VLAN unless a join request is received on this
port. This is equivalent to registration normal in the IEEE
802.1Q standard.
Select the tagging behavior for this port in this VLAN.
Tagged - specifies to transmit traffic for this VLAN as tagged
frames.
Untagged - specifies to transmit traffic for this VLAN as
untagged frames.
show vlan brief
Privileged EXEC
User EXEC
There is a VLAN Identifier (vlanid) associated with each
VLAN. The range of the VLAN ID is 1 to 4094.
A string associated with this VLAN as a convenience. It can
be up to 32 alphanumeric characters long, including blanks.
The default is blank. VLAN ID 1 always has a name of
"Default." This field is optional.
Type of VLAN, which can be Default (VLAN ID = 1) or
static (one that is configured and permanently defined), or a
Dynamic (one that is created by GVRP registration).
v1.0, March 2006
VLAN Commands