NETGEAR ProSafe FSM7326P Cli Reference Manual page 327

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
If you use the
Packets Received
Without Error
Broadcast
Packets
Received
Packets Received
With Error
Packets
Transmitted
Without Error
Broadcast
Packets
Transmitted
Transmit Packet
Errors
Address Entries
Currently In Use
VLAN Entries
Currently In Use
Time Since
Counters Last
Cleared
System Maintenance Commands
parameter, the following information appears:
switchport
The total number of packets (including broadcast packets and
multicast packets) received by the processor.
The total number of packets received that were directed to the
broadcast address. Note that this does not include multicast
packets.
The number of inbound packets that contained errors prevent-
ing them from being deliverable to a higher-layer protocol.
Total number of packets transmitted out the interface.
The total number of packets that higher-level protocols
requested to be transmitted to the Broadcast address, includ-
ing those that were discarded or not sent.
The number of outbound packets that could not be transmit-
ted because of errors.
The total number of Forwarding Database Address Table
entries now active on the switch, including learned and static
entries.
The number of VLAN entries presently occupying the VLAN
table.
The elapsed time, in days, hours, minutes, and seconds since
the statistics for this switch were last cleared.
v1.0, March 2006
18-5