Show Ip Ospf Neighbor Brief - NETGEAR ProSafe FSM7326P Cli Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
Events
Permanence
Hellos
Suppressed
Retransmission
Queue Length

14.6.47 show ip ospf neighbor brief

This command displays the OSPF neighbor table list. The information below is displayed
only if OSPF is enabled.
Format
Modes
Routing Commands
Init - an Hello packet has recently been seen from the neigh-
bor, but bi-directional communication has not yet been estab-
lished.
2 way - communication between the two routers is bi-direc-
tional.
Exchange start - the first step in creating an adjacency
between the two neighboring routers, the goal is to decide
which router is the master and to decide upon the initial DD
sequence number.
Exchange - the router is describing its entire link state data-
base by sending Database Description packets to the neigh-
bor.
Loading - Link State Request packets are sent to the neighbor
asking for the more recent LSAs that have been discovered
(but not yet received) in the Exchange state.
Full - the neighboring routers are fully adjacent and they will
now appear in router-LSAs and network-LSAs.
The number of times this neighbor relationship has changed
state, or an error has occurred.
Displays the status of the entry, either dynamic or permanent.
This refers to how the neighbor became known.
Indicates whether Hellos are being suppressed to the neigh-
bor.
Is an integer representing the current length of the retransmis-
sion queue of the specified neighbor router Id of the specified
interface.
show ip ospf neighbor brief {<unit/slot/port> |
all}
Privileged EXEC
User EXEC
v1.0, March 2006
14-55