Archive Download-Sw; Slot - NETGEAR ProSafe FSM7326P Cli Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,

17.1.7 archive download-sw

This command downloads the STK file to the switch. The
switch must be reset for the new code to start running.
Format
Mode

17.1.8 slot

This command configures a slot in the system. The
identifier of the slot. The
types, indicating the type of the card being preconfigured in the specified slot. The card
index is a 32-bit integer. If a card is currently present in the slot that is unconfigured, the
configured information will be deleted and the slot will be re-configured with default
information for the card.
Format
Mode
Note: Card index can be obtained by executing show supported cardtype
17.1.8.1 no slot
This command removes configured information from an existing slot in the system.
Format
Mode
Note: Card index can be obtained by executing show supported cardtype
17-4
archive download-sw <url>
Stack Global Config
<cardindex>
slot <unit/slot/port> <cardindex>
Global Config
command in User EXEC mode.
no slot <unit/slot/port> <cardindex>
Global Config
command in the User-EXEC mode.
v1.0, March 2006
<url>
<unit/slot/port>
is the index into the database of the supported card
is the transfer mode. The
is the slot
Stacking Commands