Auto-Summary; Default-Information Originate (Rip); Default-Metric (Rip) - NETGEAR ProSafe FSM7326P Cli Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
14.7.3.1 no ip rip
This command disables RIP on a router interface.
Format
Mode

14.7.4 auto-summary

This command enables the RIP auto-summarization mode.
Default
Format
Mode
14.7.4.1 no auto-summary
This command disables the RIP auto-summarization mode.
Format
Mode

14.7.5 default-information originate (RIP)

This command is used to control the advertisement of default routes.
Format
Mode
14.7.5.1 no default-information originate (RIP)
This command is used to control the advertisement of default routes.
Format
Mode

14.7.6 default-metric (RIP)

This command is used to set a default for the metric of distributed routes.
Format
Mode
14-60
no ip rip
Interface Config
disabled
auto-summary
Router RIP Config
no auto-summary
Router RIP Config
default-information originate
Router RIP Config
no default-information originate
Router RIP Config
default-metric <0-15>
Router RIP Config
v1.0, March 2006
Routing Commands