Network Javamode; Show Ip Http - NETGEAR ProSafe FSM7326P Cli Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,

3.5.5 network javamode

This command specifies whether or not the switch should allow access to the Java applet
in the header frame of the Web interface. When access is enabled, the Java applet can be
viewed from the Web interface. When access is disabled, the user cannot view the Java
applet.
Default
Format
Mode
3.5.5.1 no network javamode
This command disallows access to the Java applet in the header frame of the Web
interface. When access is disabled, the user cannot view the Java applet.
Format
Mode

3.5.6 show ip http

This command displays the http settings for the switch.
Format
Mode
Secure-Server
Administrative
Mode
Secure Protocol
Level
Secure Port
HTTP Mode
Administrative Access Commands
enabled
network javamode
Privileged EXEC
no network javamode
Privileged EXEC
show ip http
Privileged EXEC
Indicates whether the administrative mode of secure HTTP is
enabled or disabled.
Possible values are SSL3, TSL1, or both SSL3 and TSL1.
This field specifies the port configured for SSLT.
This field indicates whether the HTTP mode is enabled or
disabled.
v1.0, March 2006
3-17