Redistribute; Maximum-Paths - NETGEAR ProSafe FSM7326P Cli Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,

14.6.37 redistribute

This command configures OSPF protocol to allow redistribution of routes from the
specified source protocol/routers.
Default
Format
Mode
14.6.37.1 no redistribute
This command configures OSPF protocol to prohibit redistribution of routes from the
specified source protocol/routers.
Format
Mode

14.6.38 maximum-paths

This command sets the number of paths that OSPF can report for a given destination
where
maxpaths
Default
Format
Mode
14.6.38.1 no maximum-paths
This command resets the number of paths that OSPF can report for a given destination
back to its default value.
Format
Mode
14-46
metric - unspecified; type - 2; tag - 0
redistribute {rip | bgp | static | connected}
[metric <0-16777215>] [metric-type {1 | 2}] [tag
<0-4294967295>] [subnets]
Router OSPF Config
no redistribute {rip | bgp | static | connected}
[metric] [metric-type] [tag] [subnets]
Router OSPF Config
is platform dependent.
4
maximum-paths <maxpaths>
Router OSPF Config
no maximum-paths
Router OSPF Config
v1.0, March 2006
Routing Commands