Cos-Queue Min-Bandwidth; Cos-Queue Strict; Traffic-Shape - NETGEAR ProSafe FSM7326P Cli Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,

13.1.5 cos-queue min-bandwidth

This command specifies the minimum transmission bandwidth guarantee for each
interface queue. The total number of queues supported per interface is platform specific. A
value from 0-100 (percentage of link rate) must be specified for each supported queue,
with 0 indicating no guaranteed minimum bandwidth. The sum of all values entered must
not exceed 100.
Format
Modes
13.1.5.1 no cos-queue min-bandwidth
This command restores the default for each queue's minimum bandwidth value.
Format
Modes

13.1.6 cos-queue strict

This command activates the strict priority scheduler mode for each specified queue.
Format
Modes
13.1.6.1 no cos-queue strict
This command restores the default weighted scheduler mode for each specified queue.
Format
Modes

13.1.7 traffic-shape

This command specifies the maximum transmission bandwidth limit for the interface as a
whole. Also known as rate shaping, traffic shaping has the effect of smoothing temporary
traffic bursts over time so that the transmitted traffic rate is bounded.
13-4
cos-queue min-bandwidth <bw-0> <bw-1> ... <bw-n>
Global Config
Interface Config
no cos-queue min-bandwidth
Global Config
Interface Config
cos-queue strict <queue-id-1> [<queue-id-2> ...
<queue-id-n>]
Global Config
Interface Config
no cos-queue strict <queue-id-1> [<queue-id-2> ...
<queue-id-n>]
Global Config
Interface Config
v1.0, March 2006
Quality of Service (QoS) Commands