NETGEAR ProSafe FSM7326P Cli Reference Manual page 96

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
Port Forwarding
State
Port Role
Auto-Calculate
Port Path Cost
Port Path Cost
Auto-Calculate
External Port Path
Cost
External Port Path
Cost
Designated Root
Designated Port
Cost
Designated
Bridge
Designated Port
Identifier
If you specify 0 (defined as the default CIST ID) as the
the settings and parameters for a specific switch port within the common and internal
spanning tree. The
following are displayed.
Port Identifier
Port Priority
Port Forwarding
State
Port Role
Port Path Cost
Designated Root
5-14
Current spanning tree state of this port.
Each enabled MST Bridge Port receives a Port Role for each
spanning tree. The port role is one of the following values:
Root Port, Designated Port, Alternate Port, Backup Port,
Master Port or Disabled Port
This indicates whether auto calculation for port path cost is
enabled.
Configured value of the Internal Port Path Cost parameter.
This indicates whether auto calculation for external port path
cost is enabled.
Configured value of the external Port Path Cost parameter.
The Identifier of the designated root for this port.
Path Cost offered to the LAN by the Designated Port
B
ridge Identifier of the bridge with the Designated Port.
Port on the Designated Bridge that offers the lowest cost to
the LAN.
is the desired switch port. In this case, the
<unit/slot/port>
The port identifier for this port within the CST.
The priority of the port within the CST.
The forwarding state of the port within the CST.
The role of the specified interface within the CST.
The configured path cost for the specified interface.
Identifier of the designated root for this port within the CST.
v1.0, March 2006
, this command displays
<mstid>
Spanning Tree Protocol Commands