Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
Format
Mode
The following information is repeated for each user priority.
IP Precedence
Traffic Class
13.1.10 show classofservice ip-dscp-mapping
This command displays the current IP DSCP mapping to internal traffic classes for the
global configuration settings.
Format
Mode
The following information is repeated for each user priority.
IP DSCP
Traffic Class
13.1.11 show classofservice trust
This command displays the current trust mode setting for a specific interface. The unit/
slot/port parameter is optional and is only valid on platforms that support independent per-
port class of service mappings. If specified, the port trust mode of the interface is
displayed. If omitted, the most recent global configuration settings are displayed.
Format
Mode
Non-IP Traffic
Class
Untrusted Traffic
Class
13-6
show classofservice ip-precedence-mapping [unit/
slot/port]
Privileged EXEC
The IP Precedence value.
The traffic class internal queue identifier to which the IP Pre-
cedence value is mapped.
show classofservice ip-dscp-mapping
Privileged EXEC
The IP DSCP value.
The traffic class internal queue identifier to which the IP
DSCP value is mapped.
show classofservice trust [unit/slot/port]
Privileged EXEC
The traffic class used for non-IP traffic. This is only dis-
played when the COS trust mode is set to trust ip-precedence.
The traffic class used for all untrusted traffic. This is only dis-
played when the COS trust mode is set to 'untrusted'.
v1.0, March 2006
Quality of Service (QoS) Commands