Switch Renumber; Movemanagement; Archive Copy-Sw - NETGEAR ProSafe FSM7326P Cli Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,

17.1.4 switch renumber

This command changes the switch identifier for a switch in the stack. The
the current switch identifier on the switch whose identifier is to be changed. The
is the updated value of the switch identifier. Upon execution, the switch will
<newunit>
be configured with the configuration information for the new switch, if any. The old
switch configuration information will be retained, however the old switch will be
operationally unplugged. This command is executed on the Primary Management Unit.
Format
Mode

17.1.5 movemanagement

This command moves the Primary Management Unit functionality from one switch to
another. The
<fromunit>
Unit. The
<tounit>
execution, the entire stack (including all interfaces in the stack) is unconfigured and
reconfigured with the configuration on the new Primary Management Unit. After the
reload is complete, all stack management capability must be performed on the new
Primary Management Unit. To preserve the current configuration across a stack move,
execute the
copy system:running-config nvram:startup-config
EXEC) command before performing the stack move. A stack move causes all routes and
layer 2 addresses to be lost. This command is executed on the Primary Management Unit.
The administrator is prompted to confirm the management move.
Format
Mode

17.1.6 archive copy-sw

This command replicates the STK file from the Primary Management Unit to the other
switch(es) in the stack. The code is loaded on the destination system
otherwise the code is loaded on all switches in the stack. Switch(es) must be reset for the
new code to start running.
Format
Mode
Stacking Commands
switch <oldunit> renumber <newunit>
Global Config
is the switch identifier on the current Primary Management
is the switch identifier on the new Primary Management Unit. Upon
movemanagement <fromunit> <tounit>
Stack Global Config
archive copy-sw <destination-system <unit>>
Stack Global Config
v1.0, March 2006
is
<oldunit>
(in Privileged
, if specified,
<unit>
17-3