Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
4.4.4 macfilter adddest
This command adds the interface to the destination filter set for the MAC filter with the
given
<macaddr>
a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
The
<vlanid>
Format
Mode
4.4.4.1 no macfilter adddest
This command removes a port from the destination filter set for the MAC filter with the
given
<macaddr>
a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
The
<vlanid>
Format
Mode
4.4.5 macfilter adddest all
This command adds all interfaces to the destination filter set for the MAC filter with the
given
<macaddr>
as a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
The
<vlanid>
Format
Mode
4.4.5.1 no macfilter adddest all
This command removes all ports from the destination filter set for the MAC filter with the
given
<macaddr>
as a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
The
<vlanid>
Format
Mode
4-16
and VLAN of
<vlanid>
parameter must identify a valid VLAN.
macfilter adddest <macaddr> <vlanid>
Interface Config
and VLAN of
<vlanid>
parameter must identify a valid VLAN.
no macfilter adddest <macaddr> <vlanid>
Interface Config
and VLAN of
<vlanid>
parameter must identify a valid VLAN.
macfilter adddest {all | <macaddr> <vlanid>}
Global Config
and VLAN of
<vlanid>
parameter must identify a valid VLAN.
no macfilter adddest {all | <macaddr> <vlanid>}
Global Config
v1.0, March 2006
. The
parameter must be specified as
<macaddr>
. The
parameter must be specified as
<macaddr>
. The
parameter must be specified
<macaddr>
. The
parameter must be specified
<macaddr>
Port and System Setup Commands