Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
18.3.1 logging buffered
This command enables logging to an in-memory log that keeps up to 128 logs.
Default
Format
Mode
18.3.1.1 no logging buffered
This command disables logging to in-memory log.
Format
Mode
18.3.2 logging buffered wrap
This command enables wrapping of in-memory logging when the log file reaches full
capacity. Otherwise when the log file reaches full capacity, logging stops.
Default
Format
Mode
18.3.2.1 no logging wrap
This command disables wrapping of in-memory logging and configures logging to stop
when the log file capacity is full.
Format
Mode
18.3.3 logging console
This command enables logging to the console. You can specify the
value as either an integer from 0 to 7 or symbolically through one of the following
keywords:
emergency
informational
Default
Format
Mode
18-22
disabled; critical
logging buffered
Global Config
no logging buffered
Global Config
enabled
logging buffered wrap
Privileged EXEC
no logging buffered wrap
Privileged EXEC
(0),
(1),
alert
critical
(6), or
(7).
debug
disabled; critical
logging console [severitylevel]
Global Config
v1.0, March 2006
<severitylevel>
(2),
(3),
error
warning
System Maintenance Commands
(4),
(5),
notice