NETGEAR ProSafe FSM7326P Cli Reference Manual page 293

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
Receive version
Both RIP Admin
Mode
Link State
Authentication
Type
Default Metric
The following information will be invalid if the link state is down.
Bad Packets
Received
Bad Routes
Received
Updates Sent
Routing Commands
The RIP version(s) allowed when receiving updates from the
specified interface. The types are none, RIP-1, RIP-2, Both.
This is a configured value.
RIP administrative mode of router RIP operation; enable acti-
vates, disable de-activates it. This is a configured value.
Indicates whether the RIP interface is up or down. This is a
configured value.
The RIP Authentication Type for the specified interface. The
types are none, simple, and encrypt. This is a configured
value.
A number which represents the metric used for default routes
in RIP updates originated on the specified interface. This is a
configured value.
The number of RIP response packets received by the RIP
process which were subsequently discarded for any reason.
The number of routes contained in valid RIP packets that
were ignored for any reason.
The number of triggered RIP updates actually sent on this
interface.
v1.0, March 2006
14-67