Mtu; Shutdown - NETGEAR ProSafe FSM7326P Cli Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,

4.1.5 mtu

This command sets the maximum transmission unit (MTU) size, in bytes, for physical and
port-channel (LAG) interfaces. For the standard implementation, the MTU size is a valid
integer between 1522 - 9216 for tagged packets and a valid integer between 1518 - 9216
for untagged packets.
Note: To receive and process packets, the Ethernet MTU must include any extra
Default
Format
Mode
4.1.5.1 no mtu
This command sets the default MTU size (in bytes) for the interface.
Format
Mode

4.1.6 shutdown

This command disables a port.
Note: You can use the
Default
Format
Mode
Port and System Setup Commands
bytes that Layer-2 headers might require. To configure the IP MTU size,
which is the maximum size of the IP packet (IP Header + IP payload), see
Section 14.2.9 "ip mtu" on page
1518 (untagged)
mtu <1518-9216>
Interface Config
no mtu
Interface Config
shutdown
interfaces, but not on VLAN routing interfaces.
enabled
shutdown
Interface Config
v1.0, March 2006
14-11.
command on physical and port-channel (LAG)
4-3