Show Mac-Address-Table Multicast - NETGEAR ProSafe FSM7326P Cli Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
Agetime

4.4.10 show mac-address-table multicast

This command displays the Multicast Forwarding Database (MFDB) information. If you
enter the command with no parameter, the entire table is displayed. You can display the
table entry for one MAC Address by specifying the MAC address as an optional
parameter.
Format
Mode
MAC Address
Type
Component
Description
Interfaces
Forwarding
Interfaces
Port and System Setup Commands
display the aging timeouts associated with all forwarding
databases.
In an IVL system, this parameter displays the address aging
timeout for the associated forwarding database.
show mac-address-table multicast <macaddr>
Privileged EXEC
A multicast MAC address for which the switch has forward-
ing and or filtering information. The format is two-digit hexa-
decimal numbers separated by colons, for example
01:23:45:67:89:AB. In an IVL system the MAC address will
be displayed as a MAC address and VLAN ID combination
of 8 bytes.
This displays the type of the entry. Static entries are those that
are configured by the end user. Dynamic entries are added to
the table as a result of a learning process or protocol.
The component that is responsible for this entry in the Multi-
cast Forwarding Database. Possible values are IGMP Snoop-
ing, GMRP, and Static Filtering.
The text description of this multicast table entry.
The list of interfaces that are designated for forwarding
(Fwd:) and filtering (Flt:).
The resultant forwarding list is derived from combining all
the component's forwarding interfaces and removing the
interfaces that are listed as the static filtering interfaces.
v1.0, March 2006
4-19