Clear Ip Route Rip <Ip-Address; Show Ip Brief; Show Ip Interface - NETGEAR ProSafe FSM7326P Cli Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
14.2.19 clear ip route rip <ip-address>
This command removes only the route entries associated with <ip-address> learned from
RIP protocol over the network.
Format
Mode

14.2.20 show ip brief

This command displays all the summary information of the IP. This command takes no
options.
Format
Modes
Default Time to
Live
Routing Mode
IP Forwarding
Mode
Maximum Next
Hops

14.2.21 show ip interface

This command displays all pertinent information about the IP interface.
Format
Modes
Primary IP
Address
14-14
clear ip route rip <ip-address>
Privileged EXEC
show ip brief
Privileged EXEC
User EXEC
The computed TTL (Time to Live) of forwarding a packet
from
the local router to the final destination.
Shows whether the routing mode is enabled or disabled.
Shows whether forwarding of IP frames is enabled or dis-
abled. This is a configured value.
Shows the maximum number of next hops the packet can
travel.
show ip interface <unit/slot/port>
Privileged EXEC
User EXEC
Displays the primary IP address and subnet masks for the
interface. This value appears only if you configure it.
v1.0, March 2006
Routing Commands