Show Ip Ospf Interface Stats - NETGEAR ProSafe FSM7326P Cli Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
Retransmit
Interval
Transit Delay
Interval
LSA Ack Interval

14.6.45 show ip ospf interface stats

This command displays the statistics for a specific interface. The information below will
only be displayed if OSPF is enabled.
Format
Modes
OSPF Area ID
Spf Runs
Area Border
Router Count
AS Border Router
Count
Area LSA Count
IP Address
OSPF Interface
Events
Virtual Events
Neighbor Events
Routing Commands
A number representing the OSPF Retransmit Interval for the
specified interface.
A number representing the OSPF Transit Delay for the speci-
fied interface.
A number representing the OSPF LSA Acknowledgement
Interval for the specified interface.
show ip ospf interface stats <unit/slot/port>
Privileged EXEC
User EXEC
The area id of this OSPF interface.
The number of times that the intra-area route table has been
calculated using this area's link-state database.
The total number of area border routers reachable within this
area. This is initially zero, and is calculated in each SPF pass.
The total number of Autonomous System border routers
reachable within this area.
The total number of link-state advertisements in this area's
link-state database, excluding AS External LSAs.
The IP address associated with this OSPF interface.
The number of times the specified OSPF interface has
changed its state, or an error has occurred.
The number of state changes or errors that occurred on this
virtual link.
The number of times this neighbor relationship has changed
state, or an error has occurred.
v1.0, March 2006
14-53