Show Logging - NETGEAR ProSafe FSM7326P Cli Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
Time Since
Counters Last
Cleared

18.1.6 show logging

This command displays the trap log that the switch maintains. The trap log contains a
maximum of 256 entries that wrap.
Note: Trap log information is not retained across a switch reset.
Format
Mode
Number of Traps
since last reset
Number of Traps
since log last
displayed
18-14
Address Entries in Use - The number of Learned and static
entries in the Forwarding Database Address Table for this
switch.
Maximum VLAN Entries - The maximum number of Vir-
tual LANs (VLANs) allowed on this switch.
Most VLAN Entries Ever Used - The largest number of
VLANs that have been active on this switch since the last
reboot.
Static VLAN Entries - The number of presently active
VLAN entries on this switch that have been created statically.
Dynamic VLAN Entries - The number of presently active
VLAN entries on this switch that have been created by
GVRP registration.
VLAN Deletes - The number of VLANs on this switch that
have been created and then deleted since the last reboot.
The elapsed time, in days, hours, minutes, and seconds, since
the statistics for this switch were last cleared.
show logging
Privileged EXEC
The number of traps that have occurred since the last reset.
The number of traps that have occurred since the traps were
last displayed. Getting the traps by any method (terminal
v1.0, March 2006
System Maintenance Commands