NETGEAR ProSafe FSM7326P Cli Reference Manual page 219

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
Table 13-1. Ethertype Keyword and 4-digit Hexadecimal Value (continued)
Ethertype Keyword
ibmsna
ipv4
ipv6
ipx
mplsmcast
mplsucast
netbios
novell
pppoe
rarp
The vlan and cos parameters refer to the VLAN identifier and 802.1p user priority fields,
respectively, of the VLAN tag. For packets containing a double VLAN tag, this is the first
(or outer) tag.
The assign-queue parameter allows specification of a particular hardware queue for
handling traffic that matches this rule. The allowed
is the number of user configurable queues available for the hardware platform. The assign-
queue parameters are only valid for a 'permit' rule.
Note: The special command form
Format
Mode
Quality of Service (QoS) Commands
Corresponding Value
0x80D5
0x0800
0x86DD
0x8037
0x8848
0x8847
0x8191
0x8137, 0x8138
0x8863, 0x8864
0x8035
Ethernet layer 2 packets, and is the equivalent of the IP access list "match
every" rule.
{deny|permit} {<srcmac> | any} {<dstmac> | any}
[<ethertypekey> | <0x0600-0xFFFF>] [vlan {eq <0-
4095>}] [cos <0-7>] [assign-queue <queue-id>]
Mac-Access-List Config
v1.0, March 2006
<queue-id>
{deny|permit} any any
value is 0-(n-1), where n
is used to match all
13-31