Network Mgmt_Vlan; Vlan; Vlan Acceptframe - NETGEAR ProSafe FSM7326P Cli Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,

6.1.2 network mgmt_vlan

This command configures the Management VLAN ID.
Default
Format
Mode
6.1.2.1 no network mgmt_vlan
This command sets the Management VLAN ID to the default.
Format
Mode

6.1.3 vlan

This command creates a new VLAN and assigns it an ID. The ID is a valid VLAN
identification number (ID 1 is reserved for the default VLAN). VLAN range is 2-4094.
Format
Mode
6.1.3.1 no vlan
This command deletes an existing VLAN. The ID is a valid VLAN identification number
(ID 1 is reserved for the default VLAN). The VLAN range is 2-4094.
Format
Mode

6.1.4 vlan acceptframe

This command sets the frame acceptance mode per interface. For VLAN Only mode,
untagged frames or priority frames received on this interface are discarded. For Admit All
mode, untagged frames or priority frames received on this interface are accepted and
assigned the value of the interface VLAN ID for this port. With either option, VLAN
tagged frames are forwarded in accordance with the IEEE 802.1Q VLAN Specification.
Default
Format
Mode
6-2
1
network mgmt_vlan <1-4069>
Privileged EXEC
no network mgmt_vlan
Privileged EXEC
vlan <2-4094>
VLAN Config
no vlan <2-4094>
VLAN Config
all
vlan acceptframe {vlanonly | all}
Interface Config
v1.0, March 2006
VLAN Commands