Policy-Map; Policy-Map Rename - NETGEAR ProSafe FSM7326P Cli Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,

13.4.9 policy-map

This command establishes a new DiffServ policy. The
sensitive alphanumeric string from 1 to 31 characters uniquely identifying the policy. The
type of policy is specific to the inbound traffic direction as indicated by the in parameter.
Note: The policy type dictates which of the individual policy attribute commands
Note: The CLI mode is changed to Policy-Map Config when this command is
Format
Mode
13.4.9.1 no policy-map
This command eliminates an existing DiffServ policy. The
name of an existing DiffServ policy. This command may be issued at any time. If the
policy is currently referenced by one or more interface service attachments, this delete
attempt fails.
Format
Mode

13.4.10 policy-map rename

This command changes the name of a DiffServ policy. The
an existing DiffServ class. The
alphanumeric string from 1 to 31 characters uniquely identifying the policy.
Format
Mode
13-20
are valid within the policy definition.
successfully executed.
policy-map <policyname> in
Global Config
no policy-map <policyname>
Global Config
<newpolicyname>
policy-map rename <policyname> <newpolicyname>
Global Config
v1.0, March 2006
parameter is a case-
<policyname>
<policyname>
<policyname> i
parameter is a case-sensitive
Quality of Service (QoS) Commands
parameter is the
s the name of