Default-Information Originate (Ospf); Default-Metric (Ospf) - NETGEAR ProSafe FSM7326P Cli Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
14.6.20.1 no area virtual-link transmit-delay
This command configures the default transmit delay for the OSPF virtual interface on the
virtual interface identified by
the Router ID of the neighbor.
Format
Mode

14.6.21 default-information originate (OSPF)

This command is used to control the advertisement of default routes.
Default
Format
Mode
14.6.21.1 no default-information originate (OSPF)
This command is used to control the advertisement of default routes.
Format
Mode

14.6.22 default-metric (OSPF)

This command is used to set a default for the metric of distributed routes.
Format
Mode
14.6.22.1 no default-metric (OSPF)
This command is used to set a default for the metric of distributed routes.
Format
Mode
Routing Commands
and
<areaid> <neighbor>
no area <areaid> virtual-link <neighbor> transmit-
delay
Router OSPF Config
metric - unspecified; type - 2
default-information originate [always] [metric <0-
16777215>] [metric-type {1 | 2}]
Router OSPF Config
no default-information originate [metric] [metric-
type]
Router OSPF Config
default-metric <1-16777215>
Router OSPF Config
no default-metric
Router OSPF Config
v1.0, March 2006
. The parameter is
<neighbor>
14-39