to prioritize ports.
6.3.1 vlan port priority all
Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
This command configures the port priority assigned for untagged packets for all ports
presently plugged into the device. The range for the priority is 0-7. Any subsequent per
port configuration will override this configuration setting.
Format
Mode
6.3.2 vlan priority
This command configures the default 802.1p port priority assigned for untagged packets
for a specific interface. The range for the priority is 0-7
Default
Format
Mode
6-14
vlan port priority all <priority>
Global Config
0
vlan priority <priority>
Interface Config
v1.0, March 2006
VLAN Commands