Show Poe - NETGEAR ProSafe FSM7326P Cli Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
• Delivering Power—the port is providing power to POE device
• Fault—the POE device is not IEEE compliance, no power is provided
• Test—the port is in testing state
• Other Fault—the port has experience problems other than compliance issue
When a port begins to deliver power, there will be a trap indicating so. When a port stops
delivering power, there will be a trap indicating so.

16.1.6 show poe

This command displays the total power available and the total power consumed in the
system.
Format
Mode
Power Over Ethernet Commands
show poe
Privilege
v1.0, March 2006
16-5