Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
18.2.2 clear config
This command resets the configuration to the factory defaults without powering off the
switch. When you issue this command, a prompt appears to confirm that the reset should
proceed. When you enter
Format
Mode
18.2.3 clear counters
This command clears the statistics for a specified
for the entire switch based upon the argument.
Format
Mode
18.2.4 clear igmpsnooping
This command clears the tables managed by the IGMP Snooping function and attempts to
delete these entries from the Multicast Forwarding Database.
Format
Mode
18.2.5 clear pass
This command resets all user passwords to the factory defaults without powering off the
switch. You are prompted to confirm that the password reset should proceed.
Format
Mode
18.2.6 enable passwd
This command prompts you to change the Privileged EXEC password.
Format
Mode
18.2.7 clear port-channel
This command clears all port-channels (LAGs).
18-18
, you automatically reset the switch.
y
clear config
Privileged EXEC
clear counters {<unit/slot/port> | all}
Privileged EXEC
clear igmpsnooping
Privileged EXEC
clear pass
Privileged EXEC
enable passwd
User EXEC
v1.0, March 2006
<unit/slot/port>,
System Maintenance Commands
for all the ports, or