Show Access-Lists - NETGEAR ProSafe FSM7326P Cli Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,

13.8.4 show access-lists

This command displays IP ACLs and MAC access control lists information for a
designated interface and direction.
Format
Mode
ACL Type
ACL ID
Sequence
Number
Quality of Service (QoS) Commands
show access-lists interface <unit/slot/port> in
Privileged EXEC
Type of access list (IP or MAC).
Access List name for a MAC access list or the numeric iden-
tifier for an IP access list.
An optional sequence number may be specified to indicate
the order of this access list relative to other access lists
already assigned to this interface and direction. A lower num-
ber indicates higher precedence order. If a sequence number
is already in use for this interface and direction, the specified
access list replaces the currently attached access list using
that sequence number. If the sequence number is not speci-
fied by the user, a sequence number that is one greater than
the highest sequence number currently in use for this inter-
face and direction is used. Valid range is (1 to 4294967295).
v1.0, March 2006
13-37