Service Dhcp; Ip Dhcp Bootp Automatic - NETGEAR ProSafe FSM7326P Cli Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
7.2.2.1 no ip dhcp ping packets
This command prevents the server from pinging pool addresses and sets the number of
packets to 0.
Default
Format
Mode

7.2.3 service dhcp

This command enables the DHCP server.
Default
Format
Mode
7.2.3.1 no service dhcp
This command disables the DHCP server.
Format
Mode

7.2.4 ip dhcp bootp automatic

This command enables the allocation of the addresses to the bootp client. The addresses
are from the automatic address pool.
Default
Format
Mode
7.2.4.1 no ip dhcp bootp automatic
This command disables the allocation of the addresses to the bootp client. The address are
from the automatic address pool.
Format
Mode
7-10
0
no ip dhcp ping packets
Global Config
disabled
service dhcp
Global Config
no service dhcp
Global Config
disabled
ip dhcp bootp automatic
Global Config
no ip dhcp bootp automatic
Global Config
v1.0, March 2006
DHCP Commands