Port-Channel; Clear Port-Channel; Port-Channel Staticcapability - NETGEAR ProSafe FSM7326P Cli Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,

12.1.4 port-channel

This command configures a new port-channel and generates a logical unit/slot/port
number for the port-channel. The
"-" character as well as alphanumeric characters. Display this number using the
port channel
Note: Before you include a port in a port-channel, set the port physical mode. For
Format
Mode
12.1.4.1 no port-channel
This command deletes a port-channel (LAG).
Format
Mode

12.1.5 clear port-channel

Use this command to clear all configured port channels.
Format
Mode

12.1.6 port-channel staticcapability

This command enables the support of port-channels (static link aggregations) on the
device. By default, the static capability for all port-channels is disabled.
Default
Format
Mode
Port-Channel/LAG (802.3ad) Commands
<name>
command.
more information, see
port-channel <name>
Global Config
no port-channel {<logical unit/slot/port> | all}
Global Config
clear port-channel
Privileged EXEC
disabled
port-channel staticcapability
Global Config
v1.0, March 2006
field is a character string which allows the dash
Section 4.1.8 "speed" on page
show
4-5.
12-3