Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
10.1.8.1 no snmp-server enable traps violation
This command disables the sending of new violation traps.
Format
Mode
10.1.9 snmp-server enable traps
This command enables the Authentication Flag.
Default
Format
Mode
10.1.9.1 no snmp-server enable traps
This command disables the Authentication Flag.
Format
Mode
10.1.10 snmp-server enable traps bcaststorm
This command enables the broadcast storm trap. When enabled, broadcast storm traps are
sent only if the broadcast storm recovery mode setting associated with the port is enabled.
Default
Format
Mode
10.1.10.1 no snmp-server enable traps bcaststorm
This command disables the broadcast storm trap. When enabled, broadcast storm traps are
sent only if the broadcast storm recovery mode setting associated with the port is enabled.
Format
Mode
SNMP Commands
no snmp-server enable traps violation
Interface Config
enabled
snmp-server enable traps
Global Config
no snmp-server enable traps
Global Config
enabled
snmp-server enable traps bcaststorm
Global Config
no snmp-server enable traps bcaststorm
Global Config
v1.0, March 2006
10-5