Port Lacpmode; Port Lacpmode All; Port-Channel Adminmode - NETGEAR ProSafe FSM7326P Cli Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
12.1.6.1 no port-channel staticcapability
This command disables the support of static port-channels on the device.
Format
Mode

12.1.7 port lacpmode

This command enables Link Aggregation Control Protocol (LACP) on a port.
Default
Format
Mode
12.1.7.1 no port lacpmode
This command disables Link Aggregation Control Protocol (LACP) on a port.
Format
Mode

12.1.8 port lacpmode all

This command enables Link Aggregation Control Protocol (LACP) on all ports.
Format
Mode
12.1.8.1 no port lacpmode all
This command disables Link Aggregation Control Protocol (LACP) on all ports.
Format
Mode

12.1.9 port-channel adminmode

This command enables a port-channel (LAG). The option
channel with the same administrative mode setting.
Format
Mode
12-4
no port-channel staticcapability
Global Config
enabled
port lacpmode
Interface Config
no port lacpmode
Interface Config
port lacpmode all
Global Config
no port lacpmode all
Global Config
port-channel adminmode [all]
Global Config
Port-Channel/LAG (802.3ad) Commands
v1.0, March 2006
sets every configured port-
all