NETGEAR ProSafe FSM7326P Cli Reference Manual page 282

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
Router ID
IP Address
Neighbor Interface
Index
State
14-56
A 4 digit dotted decimal number representing the neighbor
interface.
An IP address representing the neighbor interface.
Is a
unit/slot/port
index.
Displays the current state of the neighboring router. Possible
values are:
Down- initial state of the neighbor conversation - no recent
information has been received from the neighbor.
Attempt - no recent information has been received from the
neighbor but a more concerted effort should be made to con-
tact the neighbor.
Init - an Hello packet has recently been seen from the neigh-
bor, but bi-directional communication has not yet been estab-
lished.
2 way - communication between the two routers is bi-direc-
tional.
Exchange start - the first step in creating an adjacency
between the two neighboring routers, the goal is to decide
which router is the master and to decide upon the initial DD
sequence number.
Exchange - the router is describing its entire link state data-
base by sending Database Description packets to the neigh-
bor.
Loading - Link State Request packets are sent to the neighbor
asking for the more recent LSAs that have been discovered
(but not yet received) in the Exchange state.
Full - the neighboring routers are fully adjacent and they will
now appear in router-LSAs and network-LSAs.
v1.0, March 2006
identifying the neighbor interface
Routing Commands