Network Mac-Type; Macfilter - NETGEAR ProSafe FSM7326P Cli Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,

4.4.2 network mac-type

This command specifies whether the switch uses the burned in MAC address or the
locally-administered MAC address.
Default
Format
Mode
4.4.2.1 no network mac-type
This command resets the value of MAC address to its default.
Format
Mode

4.4.3 macfilter

This command adds a static MAC filter entry for the MAC address <
VLAN <
vlanid
number in the format of b1:b2:b3:b4:b5:b6.
The restricted MAC Addresses are: 00:00:00:00:00:00, 01:80:C2:00:00:00 to
01:80:C2:00:00:0F, 01:80:C2:00:00:20 to 01:80:C2:00:00:21, and FF:FF:FF:FF:FF:FF.
The < > parameter must identify a valid VLAN.
vlanid
Up to 100 static MAC filters may be created.
Format
Mode
4.4.3.1 no macfilter
This command removes all filtering restrictions and the static MAC filter entry for the
MAC address
specified as a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
The
<vlanid>
Format
Mode
Port and System Setup Commands
burnedin
network mac-type {local | burnedin}
Privileged EXEC
no network mac-type
Privileged EXE
>. The < > parameter must be specified as a 6-byte hexadecimal
macaddr
macfilter <macaddr> <vlanid>
Global Config
on the VLAN
<macaddr>
parameter must identify a valid VLAN.
no macfilter <macaddr> <vlanid>
Global Config
v1.0, March 2006
. The
<vlanid> <macaddr>
> on the
macaddr
parameter must be
4-15