System Maintenance Commands - NETGEAR ProSafe FSM7326P Cli Reference Manual

This section describes the system maintenance commands available in the 7300S Series
Stackable Switch CLI.
The System Maintenance Commands section includes the following subsections:
• Section 18.1 "System Information and Statistics Commands" on page 18-2
• Section 18.2 "System Utility Commands" on page 18-17
• Section 18.3 "Logging Commands" on page 18-21
• Section 18.4 "CLI Command Logging Command" on page 18-27
• Section 18.5 "Configuration Scripting Commands" on page 18-28
The commands in this section are in one of four functional groups:
• Show commands display switch settings, statistics, and other information.
• Configuration commands configure features and options of the switch. For every
configuration command, there is a show command that displays the configuration
setting.
• Copy commands transfer or save configuration and informational files to and from the
switch.
• Clear commands clear some or all of the settings to factory defaults.

System Maintenance Commands

System Maintenance Commands
v1.0, March 2006
Chapter 18
18-1