Show Authentication Users; Show Dot1X - NETGEAR ProSafe FSM7326P Cli Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
Method 1
Method 2
Method 3

11.1.18 show authentication users

This command displays information about the users assigned to the specified
authentication login list. If the login is assigned to non-configured users, the user "default"
will appear in the user column.
Format
Mode
User
Component

11.1.19 show dot1x

This command is used to show a summary of the global dot1x configuration, summary
information of the dot1x configuration for a specified port or all ports, the detailed dot1x
configuration for a specified port and the dot1x statistics for a specified port - depending
on the tokens used.
Format
Mode
If none of the optional parameters are used, the global dot1x configuration summary is
displayed.
Administrative
mode
If you use the optional
configuration for the specified port or all ports are displayed.
Port-Based Access and Authentication Commands
This displays the first method in the specified authentication
login list, if any.
This displays the second method in the specified authentica-
tion login list, if any.
This displays the third method in the specified authentication
login list, if any.
show authentication users <listname>
Privileged EXEC
This field displays the user assigned to the specified authenti-
cation login list.
This field displays the component (User or 802.1x) for which
the authentication login list is assigned.
show dot1x [{summary {<unit/slot/port> | all} |
{detail <unit/slot/port>} | {statistics <unit/
slot/port>}]
Privileged EXEC
Indicates whether authentication control on the switch is
enabled or disabled.
[summary {<unit/slot/port> | all}]
v1.0, March 2006
parameter, the dot1x
11-9