Area Virtual-Link Retransmit-Interval; Area Virtual-Link Transmit-Delay - NETGEAR ProSafe FSM7326P Cli Reference Manual

Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
14.6.18.1 no area virtual-link hello-interval
This command configures the default hello interval for the OSPF virtual interface on the
virtual interface identified by
the Router ID of the neighbor.
Format
Mode

14.6.19 area virtual-link retransmit-interval

This command configures the retransmit interval for the OSPF virtual interface on the
virtual interface identified by
the Router ID of the neighbor. The range for
Default
Format
Mode
14.6.19.1 no area virtual-link retransmit-interval
This command configures the default retransmit interval for the OSPF virtual interface on
the virtual interface identified by
is the Router ID of the neighbor.
Format
Mode

14.6.20 area virtual-link transmit-delay

This command configures the transmit delay for the OSPF virtual interface on the virtual
interface identified by
Router ID of the neighbor. The range for
Default
Format
Mode
14-38
and
<areaid> <neighbor>
no area <areaid> virtual-link <neighbor> hello-
interval
Router OSPF Config
and
<areaid> <neighbor>
5
area <areaid> virtual-link <neighbor> retransmit-
interval <0-3600>
Router OSPF Config
and
<areaid>
no area <areaid> virtual-link <neighbor> retrans-
mit-interval
Router OSPF Config
and
<areaid> <neighbor>
<seconds>
1
area <areaid> virtual-link <neighbor> transmit-
delay <0-3600>
Router OSPF Config
v1.0, March 2006
. The
<neighbor>
. The
<neighbor>
is 0 to 3600.
<seconds>
. The
<neighbor> <neighbor>
. The
<neighbor>
is 0 to 3600 (1 hour).
parameter is
parameter is
parameter
parameter is the
Routing Commands