Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
18.3.3.1 no logging console
This command disables logging to the console.
Format
Mode
18.3.4 logging host
This command enables logging to a host. You can configure up to eight hosts. The
is the IP address of the logging host. The
<ipaddr>
to 65535. You can specify the
symbolically through one of the following keywords:
(2),
(3),
error
Default
Format
Mode
System Maintenance Commands
no logging console
Global Config
<severitylevel>
(4),
(5),
warning
notice
port - 514; level - critical;
logging host <ipaddr> [<port>][<severitylevel>]
Global Config
v1.0, March 2006
value is a port number from 1
<port>
value as either an integer from 0 to 7 or
emergency
(6), or
informational
(0),
(1),
alert
critical
(7).
debug
18-23