Ftp Interface; Figure 7: Cortex Hdr Tcp-Ip Interfaces - Safran CORTEX Series User Manual

Next figure shows data flows between CORTEX HDR software components and between the CORTEX
HDR and the outside world:
Single-client Connections
Multi-client Connections
Spectrum Analysis Data (SPA)
Control Data (CTRL)
Monitoring Data (MON)
Telemetry Data (Option)
Reset Commands (RST)
Logging Data (LOG)
Vector Analysis Data (VEC)
RAC Commands (RAC)
1.5.3

FTP Interface

Received data frames can be filtered and sorted, depending on the selected TM flow, the result of the
Reed-Solomon decoding, the virtual channels, or User defined. The resulted data frames are
embedded inside specified-names files and can be store in dedicated directories on an archiving
system.
In order to recover the constructed data files through the network by external Clients, the CORTEX
HDR is fitted with a powerful FTP server. External Clients can connect this server at the standard
dedicated FTP port number.
© Safran Data Systems – IMP000074 e14r1
HIGH DATA RATE RECEIVER
HDR-4G+ USER'S MANUAL

Figure 7: CORTEX HDR TCP-IP Interfaces

This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Ref. DTU 100782
Is.Rev 3.5
Date: June 1, 2021
M&C SOFTWARE
CLIENTS
SIGNAL PROCESSING
SOFTWARE
3050
3001
3000
3075
DATA SERVER
3002
3040
3055
3003
Safran Data Systems
.
Page 42