Ldpc Status; Crc Status - Safran CORTEX Series User Manual

4.5.5.1.2.4

LDPC Status

CORRECTED ERRORS
GOOD FRAMES
BAD FRAMES
BIT ERROR RATE ON
INPUT DATA
BIT ERROR RATE ON
OUTPUT DATA
4.5.5.1.2.5

CRC Status

GOOD FRAMES
BAD FRAMES
© Safran Data Systems – IMP000074 e14r1
HIGH DATA RATE RECEIVER
HDR-4G+ USER'S MANUAL
Number of symbols corrected by the LDPC decoder (average value computed
over a one-second period of time).
Number of good transfer frames received from the LDPC decoder. Reset to 0
when the Frame Synchronizer or the LDPC decoder is set to OFF or by clicking
on in the upper tool bar (the DPU window must be active).
Number of bad transfer frames received from the LDPC decoder. Reset to 0 when
the Frame Synchronizer or the LDPC decoder is set to OFF or by clicking on
in the upper tool bar (the DPU window must be active).
Estimation of the BER at the input of the LDPC decoding. Reset to 0 when the
Frame Synchronizer or the LPC decoder is set to OFF or by clicking on
the upper tool bar (the DPU window must be active).
Estimation of the BER at the output of the LDPC decoding. Reset to 0 when the
Frame Synchronizer or the LDPC decoder is set to OFF or by clicking on
the upper tool bar (the DPU window must be active).
Number of good transfer frames received from the CRC decoder. Reset to 0 when
the Frame Synchronizer or the Reed Solomon decoder is set to OFF or by clicking
on in the upper tool bar (the DPU window must be active).
Number of bad transfer frames received from the CRC decoder. Reset to 0 when
the Frame Synchronizer or the Reed Solomon decoder is set to OFF or by clicking
on in the upper tool bar (the DPU window must be active).
It cannot be duplicated or distributed without expressed written consent.
Ref. DTU 100782
Is.Rev
Date:
Safran Data Systems
This document is the property of
3.5
June 1, 2021
in
in
.
Page 295