Safran CORTEX Series User Manual page 150

DATA PROCESSING UNIT
For each DPU, a specific parameter (Input Selection) must be set. The role of this parameter is to split
the data flow coming from the demodulator and depending on the DPU configuration. This is at this
stage that the data flow is split in 2, 4 or 8 depending on the configuration needed.
The configuration fields in the MCS are those corresponding to "Input selection" section.
The NRZ-M to NRZ-L decoding function is activated in the MCS by ticking the "NRZM DPU" field.
© Safran Data Systems – IMP000074 e14r1
HIGH DATA RATE RECEIVER
HDR-4G+ USER'S MANUAL
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Ref. DTU 100782
Is.Rev 3.5
Date: June 1, 2021
Safran Data Systems
.
Page 150