Data Logging; Standard Loging - Safran CORTEX Series User Manual

3.8

Data logging

3.8.1

Standard Loging

The HDR provides capacities to record inside logging xml files. 8 logs are possible simultaneously.
For each log there is a list of pre-defined control parameters and/or status and their corresponding
values. The recording can be periodical, on transition of a parameter/status value or on variation of a
parameter/status value versus a pre-defined threshold. All the control parameters or status of the HDR
can be recorded.
The logging files are recorded inside:
D:\ZDS\DATA\HDR\log\sti\<FILE_PATH>\<FILE_NAME>.xml
<FILE_PATH> and <FILE_NAME> are configured into text files named spyconfN.txt. They are located
into:
N.B.: If <TYPE_LOG> is specified in <FILE_PATH> and/or <FILE_NAME>, associated logging is split
into periodic/transition/variation files.
By default, if <FILE_PATH> and <FILE_NAME> are not configured, logging files will be generated in:
With the following file names, YYYYMMDDhhmmss being the date:
YYYYMMDDhhmmss_periodic.xml
YYYYMMDDhhmmss_transition.xml
YYYYMMDDhhmmss_variation.xml
These files start with configuration information: spyconfN.txt file used for this file and format of the logs
(label of the parameters to log). The following example is a generated 20150805151010_periodic.xml
for log1:
...............................................
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<log1>
<conf>
<file>d:\ZDS\Data\\HDR\log\sti\conf\log1\spyconf0.txt</file>
<format>date,IFLevel_A,eb_n0_A,bitSync_A,frameSync_A</format>
</conf>
..................................................
© Safran Data Systems – IMP000074 e14r1
HIGH DATA RATE RECEIVER
HDR-4G+ USER'S MANUAL
D:\ZDS\DATA\HDR\log\sti\conf\logi, 1 ≤ i ≤ 8.
D:\ZDS\DATA\HDR\log\sti\logi, 1 ≤ i ≤ 8.
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Ref. DTU 100782
Is.Rev 3.5
Date: June 1, 2021
Safran Data Systems
.
Page 181