Safran CORTEX Series User Manual page 264

In 8PSK mode, the following additional parameters appear at the GUI:
PHASE ROTATION
8PSK MAPPING
In 16QAM mode, the following additional parameter appears at the GUI:
16QAM MAPPING
In 16APSK mode, the following additional parameter appears at the GUI:
GAMMA1
16APSK MAPPING
In 32APSK mode, the following additional parameter appears at the GUI:
GAMMA1
GAMMA2
In 64APSK mode, the following additional parameter appears at the GUI:
GAMMA1
GAMMA2
GAMMA3
In DVB-S2 and SCCC modes, the demodulation mode is controlled from the Physical Layer window.
In Multi DPU mode, the following additional parameter appears at the GUI:
DPU MAP
© Safran Data Systems – IMP000074 e14r1
HIGH DATA RATE RECEIVER
HDR-4G+ USER'S MANUAL
Select CCSDS (Counter Clock Wise) or Inverted (Clock Wise). (see section
3.6.2.2 )
Select Natural, Natural2, Gray1, Gray2, Gray3, Gray4, Gray5 or Gray6
mapping (see section 3.6.2.2 )
Select Map 1, Map 2 or Map 3(see section 3.6.2.2 )
Allow to adjust R2/R1 of the 16APSK constellation
Select Map 1 or Map 2 (see section 3.6.2.2 )
Allow to adjust R2/R1 of the 32APSK constellation
Allow to adjust R3/R1 of the 32APSK constellation
Allow to adjust R2/R1 of the 64APSK constellation
Allow to adjust R3/R1 of the 64APSK constellation
Allow to adjust R4/R1 of the 64APSK constellation
Select 0 or 1 for th emulti-DPU processing mapping (refer to paragrah 3.4.13)
It cannot be duplicated or distributed without expressed written consent.
Ref. DTU 100782
Is.Rev
Date:
Safran Data Systems
This document is the property of
3.5
June 1, 2021
.
Page 264