Safran CORTEX Series User Manual page 317

SORT B
SORT C
EXTRACT A
Note: the data values used in the filtering, sorting and extract operations are defined in their
corresponding configuration files selected by the index values.
 Filename:
The basic name of a recorded file is the date of its creation (default name). From this basic
name a number of programmable markers can be added:
R/W
CHANNEL
EXTRACT A
FILE NBR
FILTER RS
FILTER A
SORT A OR VIRTUAL
CHANNEL
© Safran Data Systems – IMP000074 e14r1
HIGH DATA RATE RECEIVER
HDR-4G+ USER'S MANUAL
Enable or disable the Sort B operation
Offset: Offset in bits in the frame of the position of the word to extract to be
used for the sorting B operation (0 is the first bit of the synchronization marker)
Size: Size in bits of the word to extract, from 0 to 8
File: Index of the Sort B configuration file, from 0 to 255
Enable or disable the Sort C operation
Offset: Offset in bits in the frame of the position of the word to extract to be
used for the sorting C operation (0 is the first bit of the synchronization marker)
Size: Size in bits of the word to extract, from 0 to 8
File: Index of the Sort C configuration file, from 0 to 255
Enable or disable the operation of Extract A, the operation is the same as for
Sort A,B and C operations except that it impacts only the files names and not
the directories.
Offset: Offset in bits in the frame of the position of the word to extract to be
used for the Extract A operation (0 is the first bit of the synchronization marker)
Size: Size in bits of the word to extract, from 0 to 8
File: Index of the Extract A configuration file, from 0 to 255
Enable or disable the insertion of the R/W marker in the recorded files
names
Enable or disable the insertion of the selected Logical Channel marker in
the recorded files names (The selection of the logical channel for a recording
session is done in the "Global Disk and Memory Management Window)
Enable or disable the insertion of the Extract A marker in the recorded files
names
Enable or disable the insertion of the File Number marker in the recorded
files names (counter of the number of generated files during a recording
session inside a dedicated directory)
Enable or disable the insertion of the RS Filter marker in the recorded files
names
Enable or disable the insertion of the Filter A marker in the recorded files
names
Enable or disable the insertion of the Sort A marker (Generic mode) or the
Virtual Channels marker (CCSDS mode) in the recorded files names
It cannot be duplicated or distributed without expressed written consent.
Ref. DTU 100782
Is.Rev
Date:
Safran Data Systems
This document is the property of
3.5
June 1, 2021
.
Page 317