Cortex Hdr System Parameters In Registry; Cortex Station; Menus Description; Last Used Menu - Safran CORTEX Series User Manual

4.2.9

CORTEX HDR System Parameters in Registry

4.2.9.1

CORTEX Station

4.2.9.1.1

Menus Description

Access path to the Menu Description file (menu.txt).
Registry path: HKEY_LOCAL_MACHINE/SOFTWARE/In-Snec/Cortex Station/Remote Control
Keyword: MenuDescription
Default setting: "C:\\Program Files\\IN-SNEC\\crtxNt\\Menus\\menu.txt"
4.2.9.1.2

Last Used Menu

This status indicates what was the working menu before shutting down the machine
Registry path: HKEY_LOCAL_MACHINE/SOFTWARE/In-Snec/Cortex Station/Remote Control
Keyword: LastConfiguration
4.2.9.1.3

RAC Port Number

Allows changing the RAC port number:
Registry path: HKEY_LOCAL_MACHINE/SOFTWARE/In-Snec/Cortex Station/Remote Control
Keyword: PortCntx
Default setting: 3003
4.2.9.2

Demodulation Unit

4.2.9.2.1

Output Clock ON/OFF

Enabling or disabling the data clock from the Bit Synchronizer:
Registry path: HKEY_LOCAL_MACHINE/SOFTWARE/InSnec/CrtxHdr/SetDefault/Preferences
/Dmu#n
Keyword: ClkOut
Enter 0 for permanent clock
Enter 1 for disabling the clock signal when the Bit Synchronizer is unlocked.
Enter 2 for limiting the clock signal frequency deviation to 0.1% of the programmed bit rate when the Bit
Synchronizer is unlocked, and outputting the effective bit rate when the Bit Synchronizer is locked.
Enter 3 for clock setting accuracy better than 1 ppm when the Bit Synchronizer is unlocked and
outputting the effective bit rate when the Bit Synchronizer is locked.
Enter 4 for clock disabling during frequency acquisition.
Default setting: 0 (clock always present)
© Safran Data Systems – IMP000074 e14r1
HIGH DATA RATE RECEIVER
HDR-4G+ USER'S MANUAL
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Ref. DTU 100782
Is.Rev 3.5
Date: June 1, 2021
Safran Data Systems
.
Page 203