Dmx Table; Tcp/Ip Data Transmission; Tcp/Ip Playback Data Reception - Safran CORTEX Series User Manual

4.2.9.5.3

DMX table:

Registry path: HKEY_LOCAL_MACHINE/SOFTWARE/In-Snec/CrtxHdr/SetDefault/Signal
Processing /Global
Keywords: DisableDmxAllTable
1: disable the DMX table from the All Components table (refer to the document STI 100013 HDR)
0: enable the DMX table inside the All Components table
Default setting: 0 for a new software installation
Default setting: 1 for a software upgrade installation
4.2.9.5.4

TCP/IP data transmission:

Registry path: HKEY_LOCAL_MACHINE/SOFTWARE/In-Snec/CrtxHdr/SetDefault/Signal
Processing /Global
Keyword: TimeoutTcp
Delay (in second) before transmitting of an uncompleted Telemetry Data Message over TCP/IP
Default setting: 0
4.2.9.5.5

TCP/IP Playback data reception

Registry path: HKEY_LOCAL_MACHINE/SOFTWARE/In-Snec/CrtxHdr/SetDefault/Signal
Processing /Global
Keyword: TimeoutPbk
Delay (in milliseconds) before disconnecting the user from Playback port (PBK-1 or PBK-2), stopping
the playback LAN session and flushing all remaining data; if user is no longer sending data to Playback
port.
Default setting: 5000
© Safran Data Systems – IMP000074 e14r1
HIGH DATA RATE RECEIVER
HDR-4G+ USER'S MANUAL
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Ref. DTU 100782
Is.Rev 3.5
Date: June 1, 2021
Safran Data Systems
.
Page 210