Graphical User Interface Description; Command Description; Menu - Safran RTR-NeXt User Interface Manual

4 G U
RAPHICAL SER
4.1

Command Description.

4.1.1

Menu.

File New
Open
Close
Save
Save As...
Print
Print Preview
Page Setup
Exit
Connect to...
Connect
Disconnect
Execute Control Access
Open Control Port
Close Control Port
Special Command
Preferences Toolbar
Status Bar
Bottom Tabs
View Hostname
OK/Differ Management
Config/Apply
Window :
Help :
About MCS...
© Safran Data Systems – IMP000074 e14r1
Radio Telemetry Receiver
Graphical User Interface Manual
I D
NTERFACE ESCRIPTION
Ref.
Is.Rev
Customer Ref.:
Date:
Creates a new MCS document (.mcs).
Searches for and selects an existing MCS document.
Closes the active connection and MCS document.
Saves the configuration parameters in the active MCS
document.
Saves the configuration in another MCS document.
Supported only if a printer is installed
Supported only if a printer is installed
Supported only if a printer is installed
Exits the MCS
Makes a connection to a Cortex RTR.
The command is only authorized if an existing document
has been opened. The connection will fail if the
corresponding Cortex RTR is not available.
Disconnects from Cortex RTR.
Activates or deactivates the configuration mode.
Opens a TCP-IP connection to the « Control » port.
Opening a connection of this type will prevent remote
clients from opening this port.
Closes the TCP/IP connection to the « Control. » port.
Not supported.
Show or Hide the Toolbar
Show or Hide the Status bar
Put tabs at the bottom of the window
Toggle between document or host name in tabs
Standard / Auto
Enable or Disable config/apply feature
(changes require MCS restart).
Changes the window display.
Online help not supported.
Displays the version of the RTR-MCS
Safran Data Systems
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
D130486
03
-
21/06/2021
.
Page 13